Jvc KD-APD89 User Manual download pdf (Page 165)

13

EXTERNAL DEVICES

2 Select a device you want to connect.

3 • For available devices...

1 Enter the specific PIN code of the device to

the unit.

Refer to the instructions supplied with the

device to check the PIN code.

2 Use the Bluetooth device to connect.

Now connection is established and you can

use the device through the unit.

• For special device...

Use “Open” or “Search” to connect.

Connecting/disconnecting/deleting a

registered device

1 Select “BT-PHONE” or “BT-AUDIO.”

2 Select a registered device you want to

connect/disconnect/delete.

3 Enter setting menu.

4 • Select “Connect” or “Disconnect” to

connect/disconnect the selected device.

2 Select a number or blank space.

3 Repeat steps 1 and 2 until you finish

entering a PIN code.

4 Confirm the entry.

“Open...” flashes on the display.

6 Use the Bluetooth device to search and

connect.

On the device to be connected, enter the same

PIN code you have just entered for this unit.

“Connected (and device name)” appears on the

display.

Now connection is established and you can use the

device through the unit.

The device remains registered even after you

disconnect the device. Use “Connect“ (or activate

“Auto Connect”) to connect the same device from

next time on. (See the following and pages 27 and

28.)

Connecting a device

Perform steps 1 – 3 on page 12, then...

1 • Select “Search” to search for available

devices.

The unit searches and displays the list of the

available devices.

If no available device is detected, “Device Not

Found” appears.

• Select “Special” to connect a special device.

The unit displays the list of the preset devices.

Continued on the next page

EN08-13_KD-G844[UI]f.indd 13EN08-13_KD-G844[UI]f.indd 13 12/14/07 11:52:39 AM12/14/07 11:52:39 AM

1 ... 164 165 166 ... 472

Comments to this Manuals

No comments