Jvc KD-APD89 User Manual download pdf (Page 13)

ENGLISH

13EXTERNAL DEVICES

3 Repeat steps 1 and 2 until you finish

entering a PIN code.

4 Confirm the entry.

“Open...” flashes on the display.

6 Use the Bluetooth device to search and

connect.

On the device to be connected, enter the same

PIN code you have just entered for this unit.

“Connected (and device name)” appears on the

display.

Now connection is established and you can use the

device through the unit.

The device remains registered even after you

disconnect the device. Use “Connect“ (or activate

“Auto Connect”) to connect the same device from

next time on. (See the following and page 32.)

Connecting a device

Perform steps 1 – 3 on the left column, then...

1 • Select “Search” to search for available

devices.

The unit searches and displays the list of the

available devices.

If no available device is detected, “Device Not

Found” appears.

• Select “Special” to connect a special device.

The unit displays the list of the preset devices.

2 Select a device you want to connect.

Registering using “Open”

Preparation: Operate the device to turn on its

Bluetooth function.

1 Select “BT-PHONE” or “BT-AUDIO.”

2 Select “New.”

3 Enter setting menu.

4 Select “Open.”

5 Enter a PIN (Personal Identification Number)

code to the unit.

• You can enter any number you like (1-digit to

16-digit number). [Initial: 0000]

• To enter a PIN code less than 4-digit, firstly

delete the initial PIN code (0000) by pressing

number button 5 ( ) .

* Some devices have their own PIN code. Enter the

specified PIN code to the unit.

1 Move to the next (or previous) number

position.

2 Select a number or blank space.

Continued on the next page

EN08-13_KD-APD89[J]3.indd 13EN08-13_KD-APD89[J]3.indd 13 11/29/07 2:20:26 PM11/29/07 2:20:26 PM

1 ... 12 13 14 ... 472

Comments to this Manuals

No comments