Jvc RX-8040B User Manual Page 42
- Page / 134
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
40
English
Adjusting the equalization patterns
You can adjust the equalization patterns to your preference.
• Once you have made an adjustment, it is memorized for each
source.
• The equalization pattern affects the front speaker sounds only.
7
Equalization adjustment—EQ 63Hz, EQ250Hz,
EQ 1kHz, EQ 4kHz, EQ16kHz
You can adjust five frequencies (63 Hz, 250 Hz, 1 kHz, 4 kHz,
16 kHz) within the range of –8 dB to +8 dB (“0 (dB)” is the
initial setting) in 2 dB steps.
• When an adjustment is made, the D.EQ indicator lights up on
the display.
To flat the equalization pattern, set all the frequencies to
“0 (dB)” in step 4 of “Basic Procedure” on the left column.
The D.EQ indicator goes off from the display.
Note:
When Analog Direct is in use, Equalization patterns are not
available.
Adjusting the speaker output levels
You can adjust the speaker output levels.
• Once you have made an adjustment, it is memorized for each
source.
7
Adjustable speakers
You can adjust the following speakers’ output levels within the
range of –10 dB to +10 dB (“0 (dB)” is the initial setting):
SUBWFR LVL Select to adjust the subwoofer output level.
FRNT L LVL Select to adjust the left front speaker output
level.
FRNT R LVL Select to adjust the right front speaker output
level.
CENTER LVL Select to adjust the center speaker output
level.
SURR L LVL Select to adjust the left surround speaker
output level.
SURR R LVL Select to adjust the right surround speaker
output level.
SBACK LVL Select to adjust the surround back speaker
output level.
Notes:
• If you have selected “NO” or “NONE” for a speaker (see page
34), the output level for the corresponding speaker is not
adjustable.
• Speaker output levels (except the subwoofer output level) are
not adjustable when Analog Direct is in use. But when you
canceled the subwoofer output using the SUBWOOFER OUT
ON/OFF button (see page 22), you also cannot adjust the
subwoofer output level.
Basic Procedure
Before you start, remember...
There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 1 again.
Ex. When adjusting the subwoofer level to “–3.”
1. Press ADJUST.
The last selected item appears on the display.
2. Turn MULTI JOG until an item you want
appears on the display.
• In this example, select “SUBWFR LVL.” For available items,
see the list “Basic Adjustment Items” on page 39.
3. Press in MULTI JOG (PUSH SET).
The current setting (or level) for the selected item appears on the
display.
4. Turn MULTI JOG to select a setting you want or
to make an adjustment as you like.
5. Press in MULTI JOG (PUSH SET).
6. Repeat steps 2 to 5 to set other items if necessary.
7. Press EXIT.
The source indication resumes on the display.
LINEAR PCM
L
SUBWFR
R
ANALOG
VOLUME
SPEAKERS 1
ZONE 1
LINEAR PCM
L
SUBWFR
R
ANALOG
VOLUME
SPEAKERS 1
ZONE 1
LINEAR PCM
L
SUBWFR
R
ANALOG
VOLUME
SPEAKERS 1
ZONE 1
LINEAR PCM
L
SUBWFR
R
ANALOG
VOLUME
SPEAKERS 1
ZONE 1
39-41_8040[C].p65 04.5.14, 11:2940
- RX-8040B 1
- For Canada/pour Le Canada 2
- Introduction 3
- Table of Contents 4
- Parts Identification 5
- Front Panel 6
- How to open the front door 6
- CAUTION : SPEAKER IMPEDANCE 8
- Getting Started 9
- Speaker connections 10
- Connecting the subwoofer 10
- SURR BACK 11
- Analog connections 12
- Video component connections 13
- RIGHT LEFT 15
- Digital connections 16
- Setting up the RF rod antenna 16
- At an angle of 17
- Multi-room Operations 18
- On the front panel: 19
- On the remote control: 19
- Zone 1 (Main Room) Operations 21
- SPEAKERS 1 22
- LINEAR PCM 23
- DGTL AUTO DGTL D.D 24
- DGTL DTS 24
- Setting the Dynamic Range 25
- Attenuating the Input Signal 25
- Making Sounds Natural 25
- Dimmer Much dimmer 26
- Canceled 26
- Using the Sleep Timer 27
- Zone 2 (Sub-room) Operations 28
- Adjusting the Zone 2 Volume 30
- Activating the Zone 2 Front 31
- Speakers 31
- Muting the Zone 2 Sound 31
- 1 ZONE 2 31
- Receiving Radio Broadcasts 32
- To store the preset stations 33
- Basic Settings 34
- Basic Setting Items 35
- Setting the speakers 36
- Setting the speaker distance 37
- Setting the bass sounds 37
- Center speaker setting 38
- SMALL/LARGE NONE 38
- “DBS” appears (see page 24) 39
- Setting the Zone 2/Speakers 2 40
- Adjusting Sound 41
- EQ 1kHz, EQ 4kHz, EQ16kHz 42
- Adjustable speakers 42
- Surround and DSP modes 43
- Using the Surround Modes 44
- Digital Theater Systems, Inc 45
- PRO LOGIC 46
- SPEAKERS 1 46
- EX/ES/PLIIx 47
- Virtual 6.1-channel surround 49
- 3D Headphone mode—3D H PHONE 49
- Using the DSP Modes 50
- To cancel the DSP modes 51
- AUDIO POWER 52
- One-Touch Video Play 56
- DVD player 60
- STOP PAUSE 62
- * Initial setting 64
- Troubleshooting 65
- SOLUTION 66
- POSSIBLE CAUSE 66
- Specifications 67
- Table des matières 69
- Identification des parties 70
- Panneau avant 71
- Affichage 71
- Comment ouvrir la porte avant 71
- Pour commencer 74
- Connexions analogiques 77
- Connexion des appareils vidéo 78
- Remarque: 78
- Remarques: 79
- Fonctionnement multi-pièces 83
- Réglages de base 99
- Français 100
- OPTICAL signifie VCR1 104
- Ajustment du son 106
- Laboratories 110
- Utilisation des modes DSP 115
- Guide de dépannage 130
- Spécifications 132
- AUDIO/VIDEO CONTROL RECEIVER 133
Related products and manuals for Receivers and Amplifiers Jvc RX-8040B
(36 pages)
(126 pages)
© 2020, manymanuals.com. All rights reserved. | 0.462 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals