JVC RX-7520VBK User Manual download pdf (Page 12)

English

DVD

DIGITAL 1

(DVD)

DIGITAL IN

DIGITAL 2 ( CD )

Digital connections

This receiver is equipped with two DIGITAL IN terminals—one

digital coaxial terminal and one digital optical terminal.

You can connect any digital component to one of the digital

terminals using a digital coaxial cable (not supplied).

IMPORTANT:

• When connecting the DVD player or digital TV using the digital

terminals, you also need to connect it to the video jack on the rear.

Without connecting it to the video jack, you can view no playback

picture.

• After connecting the components using the DIGITAL IN terminals,

set the following correctly if necessary:

– Set the digital input (DIGITAL IN) terminal setting correctly. For

details, see “Setting the Digital Input (DIGITAL IN) Terminals” on

page 14.

– Select the digital input mode correctly. For details, see “Selecting

the Analog or Digital Input Mode” on page 14.

Digital input terminals

CD player

CD recorder

DVD player

Digital TV

Before connecting a digital

optical cable, unplug the

protective plug.

When the component has a digital coaxial

output terminal, connect it to the DIGITAL 1

(DVD) terminal with the digital coaxial cable

(not supplied).

When the component has a digital optical

output terminal, connect it to the DIGITAL 2

(CD) terminal, using the digital optical cable

(not supplied).

Notes:

• When shipped from the factory, the DIGITAL IN terminals have

been set for use with the following components:

– DIGITAL 1 (coaxial): For DVD player

– DIGITAL 2 (optical): For CD player

• When you want to operate the CD player or CD recorder using the

COMPU LINK remote control system, connect the target

component also as described in “Analog connections” (see pages 6

and 7).

• When you want to operate the DVD player using the AV COMPU

LINK remote control system, connect the DVD player also as

described in “Analog connections” (see page 8).

Connecting the Power Cord

Before plugging the receiver into an AC outlet, make sure that all

connections have been made.

Plug the power cord into an AC outlet.

Keep the power cord away from the connecting cables and the

antenna. The power cord may cause noise or screen interference. We

recommend that you use a coaxial cable to connect the antenna,

since it is well-shielded against interference.

CAUTIONS:

• Do not touch the power cord with wet hands.

• Do not pull on the power cord to unplug the cord. When unplugging

the cord, always grasp the plug so as not to damage the cord.

Digital optical cable (not supplied)

between digital optical terminals

Digital coaxial cable (not supplied)

between digital coaxial terminals

EN01-09.RX-7520V[C]f.pm5 02.2.14, 4:31 PM9

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 45 46

Comments to this Manuals

No comments

JVC RX-7520VBK User Manual Page 12

Comments to this Manuals

Related products and manuals for AV receivers JVC RX-7520VBK