JVC KW-XR616 User Manual Page 41

  • Download
  • Add to my manuals
  • Print
  • Page
    / 42
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 40
1
KW-XR616
Installation/Connection Manual
Manual Pemasangan/Penyambungan
ENGLISH / INDONESIA
0110DTSMDTJEIN
EN, IN
© 2010 Victor Company of Japan, Limited
GET0666-008A
[UN]
To prevent short circuits:
Disconnect the battery’s negative terminal and make all electrical connections before installing the unit.
Cover the terminals of the UNUSED leads with insulating tape.
Be sure to ground this unit to the car’s chassis again after installation.
Replace the fuse with one of the specified rating.
Connect speakers with a maximum power of more than 50 W (impedance of
4 Ω to 8 Ω). Otherwise, change the <AMP GAIN> setting. (See page 25 of the
INSTRUCTIONS.)
The heat sink becomes very hot after use. Be careful not to touch it when
removing this unit.
Untuk mencegah hubungan pendek:
Lepaskan terminal negatif baterai dan lakukan penyambungan semua koneksi kelistrikan sebelum memasang
unit.
Tutupi terminal lead yang TIDAK DIGUNAKAN dengan selotip.
Pastikan untuk mentanahkan unit ini ke casis mobil kembali setelah pemasangan.
Ganti sekering dengan sekering yang memenuhi pentarafan yang ditetapkan.
Sambungkan speaker dengan daya maksimal yang lebih dari 50 W (impedansi 4 Ω hingga 8 Ω). Atau jika tidak,
ubah pengaturan <AMP GAIN>. (Lihat halaman 25 dari BUKU PETUNJUK.)
Pendingin menjadi sangat panas setelah digunakan. Hati-hati untuk tidak menyentuhnya ketika memindahkan
unit ini.
12 V DC, NEGATIVE ground / 12 V DC, tanahan NEGATIF
To the car system / Ke sistem mobilYou need the installation kits which corresponds to your car. / Anda memerlukan
perlengkapan pemasangan yang sesuai dengan mobil Anda.
Check the battery system in your car /
Periksa sistem aki mobil Anda
WARNINGS / PERINGATAN
Heat sink / Pendingin
INSTALLATION / PEMASANGAN
The following illustration shows a typical installation. If you have any questions or require information
regarding installation kits, consult your JVC car audio dealer or a company supplying kits.
Ilustrasi berikut menunjukkan sebuah tipe pemasangan. Jika anda mempunyai suatu pertanyaan atau informasi
yang diperlukan mengenai alat-alat pemasangan, konsultasikan pada penyalur audio mobil JVC atau sebuah
perusahaan yang mensuplai alat-alat.
In-dash mounting / Bingkai-dalam dash
Audio system originally installed in the car /
Sistem audio yang sebelumnya terpasang di mobil
Car dashboard / Dasbor
mobil
If there is an interfering tab on the
mounting bracket, bend it flat. /
Jika ada tonjolan yang mengganggu
braket pemasangan, tekuk sehingga
rata.
Screw removed from the car /
Sekrup dilepas dari mobil
Mounting bracket removed from the car /
Braket pemasangan dilepas dari mobil
Firmly attach the ground wire to the metallic body of the car using the screw originally fixed
to the metallic body of the car. / Pasang kabel tanah dengan kuat ke bodi besi mobil dengan
menggunakan sekrup yang memang sudah terpasang di bodi besi mobil.
Installing with the mounting brackets from the car / Memasang dengan braket pemasangan dari mobil
Install the unit at an angle of less than 30˚.
Pasang penerima pada suatu sudut kurang dari
30˚.
Part list / Daftar bagian
A Flat countersunk screws—M5 × 8 mm / Sekerup
benaman datar—M5 × 8 mm (×8)
B Round head screws—M5 × 8 mm / Sekerup kepala
bulat—M5 × 8 mm (×8)
C Plate for use with a Nissan car / Pelat untuk
digunakan dengan mobil Nissan (×1)
D Power cord / Kabel power (×1)
When installing the unit in a
Nissan car / Apabila memasang
unit dalam mobil Nissan
Fix the supplied plate as illustrated. / Pasang
pelat yang tersedia seperti digambarkan.
PRECAUTIONS on power supply and speaker connections
DO NOT connect the speaker leads of the power cord to the car battery; otherwise, the unit will be
seriously damaged.
BEFORE connecting the speaker leads of the power cord to the speakers, check the speaker wiring in
your car.
TINDAKAN-TINDAKAN PENCEGAHAN pada suplai power dan
sambungan-sambungan speaker
JANGAN sambungkan ujung-ujung speaker dari kabel power ke baterai mobil; sebaliknya, unit tersebut akan
secara serius rusak.
SEBELUM menyambung ujung-ujung speaker dari kabel power ke speaker-speaker, cek perkabelan speaker
dalam mobil anda.
The fuse blows.
]
Are the red and black leads connected correctly?
Power cannot be turned on.
]
Is the yellow lead connected?
No sound from the speakers.
]
Is the speaker output lead short-circuited?
“PROTECT” appears on the display and no operation can be done.
]
Is the speaker output lead
short-circuited or touches the chassis of the car/head unit? ; Have you reset your unit?
Sound is distorted.
]
Is the speaker output lead grounded? ; Are the “–” terminals of L and R speakers
grounded in common?
Noise interfere with sounds.
]
Is the rear ground terminal connected to the car’s chassis using shorter
and thicker cords?
This unit becomes hot.
]
Is the speaker output lead grounded? ; Are the “–” terminals of L and R
speakers grounded in common?
This unit does not work at all.
]
Have you reset your unit?
Sekring meledak.
]
Apakah ujung-ujung merah dan hitam tersambung dengan benar?
Power tidak dapat dihidupkan.
]
Apakah ujung kuning sudah tersambung?
Tidak ada suara dari speaker.
]
Apakah ujung keluaran speaker terhubung pendek?
“PROTECT” muncul di layar dan tidak dapat dilakukan pengoperasian apa pun.
]
Apakah kabel
output speaker mengalami hubungan pendek atau menyentuh casis mobil/unit kepala? ; Apakah anda sudah
reset (memasang kembali) unit anda?
Suara terdistorsi.
]
Apakah ujung keluaran speaker sudah ditanahkan? ; Apakah terminal-terminal “–” dari
speaker-speaker L dan R sudah ditanahkan secara umum?
Berisik yang mengganggu suara-suara.
]
Apakah terminal tanahan belakang tersambung ke casis mobil
menggunakan kabel-kabel terpendek dan tertebal?
Unit ini menjadi panas.
]
Apakah ujung keluaran speaker sudah ditanahkan? ; Apakah terminal-terminal
“–” dari speaker-speaker L dan R sudah ditanahkan secara umum?
Unit ini tidak bekerja secara keseluruhan.
]
Apakah anda sudah reset (memasang kembali) unit anda?
TROUBLESHOOTING / PEMECAHAN MASALAH
Install_KW-XR616_008A_f.indd 1Install_KW-XR616_008A_f.indd 1 2/1/10 10:17:24 AM2/1/10 10:17:24 AM
Page view 40
1 2 ... 36 37 38 39 40 41 42

Comments to this Manuals

No comments