JVC GR-DVP9 User Manual download pdf (Page 52)

52 EN

Master Page: Left

It is also possible to copy recorded scenes from

another video unit equipped with a DV connector

onto the camcorder. Since a digital signal is sent,

there is little if any image or sound deterioration.

* When connecting the cable, open the cover.

1 Make sure all units are turned off.

2 Connect this camcorder to a video unit equipped

with a DV output connector using a DV cable as

shown in the illustration.

3 Set this camcorder’s VIDEO/MEMORY Switch to

“VIDEO”.

4 Set this camcorder’s Power Switch to “P”

while pressing down the Lock Button located on

the switch.

5 Set “REC MODE” to “SP” or “LP”. (墌 pg. 31, 34)

6 Turn on the video unit’s power.

7 Insert the source cassette in the video unit.

8 Insert the recording cassette in this camcorder.

9 Press START/STOP on the remote control to

engage the Record-Pause mode.

● The “ ” indication appears on the screen.

10 Press START/STOP on the remote control to

start recording.

● The indication rotates.

11 Press START/STOP on the remote control

again to engage the Record-Pause mode.

● The indication stops rotating.

12 Repeat steps 10 – 11 for additional editing.

Stop the video unit and camcorder.

NOTES:

● It is recommended to use the AC Power Adapter/

Charger as the power supply instead of the

battery pack. (墌 pg. 11)

● If no image is displayed on the LCD monitor, set

“S/AV INPUT” to “OFF”. (墌 pg. 31, 40)

● If the remote control is used when both the player

and recorder are JVC video units, both units will

perform the same operation. To prevent this from

happening, press the buttons on both units.

● If a blank portion or disturbed image is played

back on the player during dubbing, the dubbing

may stop so that an unusual image is not dubbed.

● Even though the DV cable is connected correctly,

sometimes the image may not appear in step 9. If

this occurs, turn off the power and make

connections again.

● Digital Dubbing is performed in the sound mode

recorded on the original tape, regardless of the

current “SOUND MODE” setting. (墌 pg. 34)

● When using a DV cable, be sure to use the

optional JVC VC-VDV204U DV cable.

Dubbing From A Video Unit

Equipped With A DV OUT

Connector (Digital Dubbing)

Core filter

To DV IN/OUT

DV cable (optional)

To DV OUT

Video unit equipped with DV

connector

Connector

Cover*

DV. IN

DUBBING (cont.)

GR-DVP9US.book Page 52 Wednesday, January 22, 2003 5:35 PM

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 83 84

Comments to this Manuals

No comments

JVC GR-DVP9 User Manual Page 52

Comments to this Manuals

Related products and manuals for Camcorders JVC GR-DVP9