JVC GR-DVP9 User Manual download pdf (Page 37)

EN 37

Master Page: Right

Wide mode

WIDE MODE (Factory-preset: OFF)

OFF: Records with no change in the screen ratio.

For playback on a TV with a normal screen ratio.

CINEMA* : Inserts black bands at the top and

bottom of the screen. The indicator appears.

During playback on wide-screen TVs, the black

bands at the top and bottom of the screen are cut

and the screen ratio becomes 16:9. When using

this mode, refer to your wide-screen TV’s

instruction manual. During playback/recording on

4:3 TVs/LCD monitor/viewfinder, black bands are

inserted at the top and bottom of the screen and

the image appears like a letter boxed 16:9 movie.

SQUEEZE* : For playback on TVs with an

aspect ratio of 16:9. Naturally expands the image

to fit the screen without distortion. The

indicator appears. When using this mode, refer to

your wide-screen TV’s instruction manual. During

playback/recording on 4:3 TVs/LCD monitor/

viewfinder, the image is elongated vertically.

D.WIDE* : The indicator appears. The

zoom range is extended beyond the maximum

optical zoom wide angle range. This mode’s wide

angle setting is equivalent to using a 0.7X wide

conversion lens. Zooming is possible from 0.7X to

a magnification set in CAMERA Menu. This mode

is suitable for shooting in a small room.

* Available only when the VIDEO/MEMORY

Switch is set to “VIDEO”.

Wind cut

WIND CUT (Factory-preset: OFF)

OFF: Disengages the function.

ON : Helps cut down on noise created by

wind. The “ ” indicator appears. The quality of

the sound will change. This is normal.

SYSTEM

Beep, melody and shutter sound

BEEP (Factory-preset: MELODY)

OFF: Even though not heard while shooting,

shutter sound is recorded on the tape.

BEEP: The beep sounds when the power is turned

on or off, and at the beginning and end of

recording. It also activates the shutter sound

effect. (墌 pg. 23, 41)

MELODY: Instead of a beep, a melody sounds

when any operation is performed. It also activates

the shutter sound effect. (墌 pg. 23, 41)

Tally lamp setting

TALLY (Factory-preset: ON)

OFF: The tally lamp remains off at all times.

ON: The tally lamp comes on to signal the start of

recording.

Remote control setting

For details, refer to “USING THE REMOTE

CONTROL UNIT” (墌 pg. 54).

REMOTE (Factory-preset: ON)

OFF: Disables the remote control operations.

ON: Enables the remote control operations.

Automatic demonstration mode

Demonstrates certain functions such as Program AE

with special effects, etc., and can be used to confirm

how these functions operate. (墌 pg. 9)

DEMO MODE (Factory-preset: ON)

OFF: Automatic demonstration will not take

place.

ON: Demonstrates certain functions such as

Program AE with special effects, etc., and can be

used to confirm how these functions operate.

Demonstration starts in the following cases:

•When the Menu Screen is closed after “DEMO

MODE” is turned “ON”.

•With “DEMO MODE” set to “ON”, if there is no

operation for about 3 minutes after the Power

Switch is set to “A” or “M”.

Performing any operation during the

demonstration stops the demonstration

temporarily. If no operation is performed for more

than 3 minutes after that, the demonstration will

resume.

System Menu

ADVANCED FEATURES

CONTINUED ON NEXT PAGE

GR-DVP9US.book Page 37 Wednesday, January 22, 2003 5:35 PM

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 83 84

Comments to this Manuals

No comments

JVC GR-DVP9 User Manual Page 37

Comments to this Manuals

Related products and manuals for Camcorders JVC GR-DVP9