JVC RX-D411S User Manual download pdf (Page 34)

Operating procedure

On the front panel ONLY:

Before you start, remember...

There is a time limit in doing the following steps. If the setting

is canceled before you finish, start from step

1 again.

Ex.: When setting the DIGITAL IN 1 terminal

1 Press SETTING.

MULTI JOG now works for the setting operation.

2 Turn MULTI JOG until the item you want

to set appears on the display.

• As you turn MULTI JOG, the setting items change as

follows:

3 Press SET.

The current setting of the selected item appears.

4 Turn MULTI JOG to select the appropriate

setting.

5 Press SET.

Your setting is stored.

6 Repeat steps 2 to 5 to set other items if

necessary.

7 Press SETTING.

The source indication resumes on the display.

1, 7 3, 5 2, 4

SUBWOOFER Ô FRONT SPK Ô CENTER SPK Ô

SURROUND SPK Ô S BACK SPK Ô S BACK OUT Ô

DIST UNIT Ô FRONT L DIST Ô FRONT R DIST Ô

CENTER DIST Ô SURR L DIST Ô SURR R DIST Ô

S BACK DIST Ô S BACK L DIST Ô S BACK R DIST Ô

EX/ES/PLIIx Ô DUAL MONO Ô SUBWOOFER OUT

Ô CROSSOVER Ô LFE ATT Ô MIDNIGHT MODE Ô

DIGITAL IN 1 Ô DIGITAL IN 2 Ô DIGITAL IN 3 Ô

AUDIO DELAY Ô HDMI SELECT Ô CMPNT SELECT

Ô VIDEO OUTPUT Ô AUTO MODE Ô (Back to the

beginning)

Setting the speakers

To obtain the best possible surround effect from the Surround

and DSP modes, register the setting about the speaker after all

connections are completed.

• If you have performed Precise Surround Setup on pages 16

to 18, the following settings are not required.

• You cannot adjust these items directly from the remote

control.

7 Setting subwoofer information—

SUBWOOFER

Select if you have connected a subwoofer or not.

SUBWFR YES Select when you have connected a

subwoofer.

The subwoofer indicator (

) lights up on

the display. You can adjust the subwoofer

output level (see page 36).

SUBWFR NO Select when you have not connected a

subwoofer. Selecting this changes the front

speaker size to “LRG” (see below).

Initial setting: NO

7 Setting the speaker size—FRONT SPK (front

speakers), CENTER SPK (center speaker),

SURROUND SPK (surround speakers), S BACK

SPK (surround back speakers)

LRG (large) Select when the cone speaker size is larger

than 12 cm.

SML (small) Select when the cone speaker size is smaller

than 12 cm.

NO Select when you have not connected

the speaker. (Not selectable for the front

speakers.)

Initial setting: LRG (for the front speakers)

SML (for the other speakers)

NOTES

• If you have selected “SML (small)” for the front speaker size, you

cannot select “LRG (large)” for other speakers.

• When “SUBWOOFER” is set to “NO,” the front speaker size is fixed to

“LRG (large)” (and you cannot select “SML (small)”).

• When “SURROUND SPK” is set to “SML (small),” you cannot select

“LRG (large)” for the surround back speaker.

• When “SURROUND SPK” is set to “NO,” the surround back speaker is

fixed to “NO.”

7 Setting the surround back speaker(s)—

S BACK OUT

SB OUT 1SPK Select when you use a single surround back

speaker.

SB OUT 2SPK Select when you use 2 surround back

speakers.

Initial setting: 2SPK

NOTES

• When “S BACK SPK” is set to “NO,” you cannot select “S BACK OUT.”

• When “S BACK OUT” is set to “1SPK,” connect the surround back

speaker to the left surround back speaker terminal (see page 8). No

sound comes from the surround back speaker if you connect it to

the right surround back speaker terminal.

DVR/DVD Ô VIDEO Ô VCR Ô TV

29-34_BasicSt.indd 3029-34_BasicSt.indd 30 06.6.9 2:24:56 PM06.6.9 2:24:56 PM

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 56 57

Comments to this Manuals

No comments

JVC RX-D411S User Manual Page 34

Comments to this Manuals

Related products and manuals for AV receivers JVC RX-D411S