Jvc DR-M100S User Manual download pdf (Page 69)

Masterpage:Right+

EN 69

Filename [M100SEK_10Subsidiary.fm]

SUBSIDIARY SETTINGS

1 Press SET UP to access the Main Menu screen.

2 Press selection keys to select AINITIAL SET UPB, then press

ENTER for confirmation.

3 Press selection keys

to select ACLOCK

SETB, then press

ENTER for

confirmation.

4 Press selection keys

to select AYEARB, then

press ENTER for

confirmation. Press

selection keys to set

the year, then press

ENTER.

● Repeat the same procedure to set the date and time.

● When you set the date, press and hold FG to change the date

by 15 days interval.

● When you set the time, press and hold FG to change the time

by 30 minutes interval.

5 Press selection keys to select AJUST CLOCKB, then press

ENTER. Press selection keys to set to the desired mode, then

press ENTER.

● The default setting is AOFFB.

● If you set to AOFFB, you can disregard the next step as you

won’t be able to receive regular clock adjustments.

6 Press selection keys to select ATV PROGRAMMEB

, then press

ENTER. Press selection keys to set the channel position to the

number representing the station transmitting clock setting data,

then press ENTER.

● The unit is preset to receive clock setting and adjustment data

from the channel selected in this step (step 6).

7 Press SET UP to start the clock operation.

NOTES:

● Just Clock (when set to AONB) adjusts the unit’s built-in clock

every hour, except for 23:00, 0:00, 1:00 and 2:00.

● Just Clock is not effective when:

^ the unit’s power is on.

^ the unit is in the Timer mode.

^ a difference of more than 3 minutes exists between the built-in

clock’s time and the actual time.

^ the unit is in the Automatic Satellite Programme Recording

mode. (A pg. 43)

^ AL-2 SELECTB is set to ASAT VIDEO/RGBB or ASAT S-VIDEO/

RGBB. (A pg. 59)

● If Just Clock is set to AONB, the unit’s clock is automatically

adjusted at the start/end of Summer Time.

● Just Clock may not function properly depending on the reception

condition.

Just Clock

The Just Clock function provides accurate time keeping through

automatic adjustments at regular intervals, by reading data from a

PDC signal.

The Just Clock option can be set to AONB or AOFFB at the Clock Set

screen. (The default setting is AOFFB.)

IMPORTANT:

If you turn off Just Clock, the accuracy of your unit’s built-in clock

may be reduced, which could adversely effect timer recording. We

recommend you to keep Just Clock set to AONB. In cases where

the clock setting data from a PDC signal is incorrect, however, you

are advised to keep Just Clock set to AOFFB.

Clock Set

IMPORTANT:

If you performed Auto Set Up (A pg. 18) or Preset Download

(A pg. 19), without ever having set the clock previously, the

unit’s built-in clock is also set automatically.

Perform the following steps only if ^

^ Auto Clock Set has not been performed correctly by Auto Set

Up or Preset Download.

^ you want to change Just Clock setting. (See AJust ClockB in

the right column)

● Turn on the unit.

● Turn on the TV and select an input mode such as EXT1.

SET UP

(FGDE)

ENTER

Selection Keys

DVD SET UP

FUNCTION SET UP

SELECT WITH [CURSORS]

THEN PRESS [ENTER]

INITIAL SET UP

AUTO CH SET

MANUAL CH SET

GUIDE PR

CLOCK SET

YEAR

DATE

2005

05/07 SAT

TIME 18:56

JUST CLOCK OFF

TV PROGRAMME 18

EXIT

SELECT

SET UP

M100SEK_00.book Page 69 Tuesday, March 22, 2005 5:31 PM

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 79 80

Comments to this Manuals

No comments

Jvc DR-M100S User Manual Page 69

Comments to this Manuals

Related products and manuals for Televisions Jvc DR-M100S