Jvc DR-M100S User Manual download pdf (Page 59)

Masterpage:Right+

EN 59

Filename [M100SEK_09Editing.fm]

EDITING

L-2 Select Setting

Set AL-2 SELECTB to the appropriate mode depending on the type

of appliance connected to the unit’s [L-2 IN/DECODER] connector.

1 Perform steps 1 and 2 of AL-1 Output And L-1 Input SettingB

(A pg. 58).

2 Press selection keys to select AL-2 SELECTB, then press

ENTER for confirmation.

3 Press selection keys

to select the

appropriate setting,

then press ENTER.

4 Press SET UP to

complete the setting.

*The boldface settings below indicate the settings at your purchase.

8 L-2 SELECT ^ VIDEO/RGB / S-VIDEO/RGB / SAT VIDEO/RGB

SAT S-VIDEO/RGB / DECODER

Select AVIDEO/RGBB or AS-VIDEO/RGBB to use this unit as the

recording deck with the player connected to the [L-2 IN/

DECODER] connector, or to use the satellite receiver connected to

the [L-2 IN/DECODER] connector.

VIDEO/RGB:

If a connected appliance’s output is compatible with regular

video signals, set to AVIDEO/RGBB.

S-VIDEO/RGB:

If a connected appliance’s output is compatible with Y/C

signals, set to AS-VIDEO/RGBB. You can obtain a high-quality

picture. (For connection, be sure to use a 21-pin SCART cable

that is compatible with the Y/C signal.)

Select ASAT VIDEO/RGBB or ASAT S-VIDEO/RGBB to view a

satellite programme with the TV set while the unit is turned off.

SAT VIDEO/RGB:

If a connected satellite receiver’s output is compatible with

regular video signals, set to ASAT VIDEO/RGBB.

SAT S-VIDEO/RGB:

If a connected satellite receiver’s output is compatible with Y/C

signals, set to ASAT S-VIDEO/RGBB. You can obtain a high-

quality S-VHS picture. (For connection, be sure to use a 21-pin

SCART cable that is compatible with the Y/C signal.)

DECODER*:

To use a decoder connected to the [L-2 IN/DECODER] connector.

* This setting is not available in the U.K.

NOTES:

● When RGB signals are output from the connected appliance

such as a satellite receiver, the unit will record in RGB signals

except when AL-2 SELECTB is set to ADECODERB.

● If you have a satellite receiver connected to the [L-2 IN/

DECODER] connector, be sure to set AL-2 SELECTB back to

appropriate mode after editing.

● When you want to play back and record RGB picture, connect the

satellite receiver’s RGB compatible output connector to the unit’s

input connector.

● If you are not connecting a satellite receiver to the [L-2 IN/

DECODER] connector, leave AL-2 SELECTB set to AVIDEO/RGBB.

● When AL-2 SELECTB is set to ASAT VIDEO/RGBB and ASAT S-

VIDEO/RGBB, ASATB appears on the TV screen or front display

panel instead of AL-2B.

● If AL-1 OUTPUTB is set to ASCART S-VIDEOB, it is not possible to

set AL-2 SELECTB to ADECODERB or ASAT VIDEO/RGBB.

● If AL-1 OUTPUTB is set to ASCART RGBB, it is not possible to set

AL-2 SELECTB to ADECODERB or ASAT S-VIDEO/RGBB.

● If AL-1 OUTPUTB is set to ACOMPONENTB and AL-2 SELECTB to

ASAT VIDEO/RGBB, ASAT S-VIDEO/RGBB or ADECODERB, be

sure to connect the [L-1 IN/OUT] connector with a TV.

● If AL-2 SELECTB is set to ASAT S-VIDEO/RGBB, be sure to set

AL-1 OUTPUTB to ASCART S-VIDEOB.

F-1 Input Setting

Set AF-1 INPUTB to the appropriate mode depending on the

connector ([VIDEO] or [S-VIDEO]) being used on the front panel.

1 Perform steps 1 and 2 of AL-1 Output And L-1 Input SettingB

(A pg. 58).

2 Press selection keys to select AF-1 INPUTB, then press

ENTER for confirmation.

3 Press selection keys

to select the

appropriate setting,

then press ENTER.

4 Press SET UP to

complete the setting.

*The boldface settings below indicate the settings at your purchase.

8 F-1 INPUT ^ VIDEO / S-VIDEO

VIDEO:

When connecting an appliance to the [VIDEO] input connector,

set to AVIDEOB.

S-VIDEO:

● When connecting an appliance to the [S-VIDEO] input

connector, set to AS-VIDEOB

DVD SET UP

FUNCTION SET UP

INITIAL SET UP

VIDEO IN/OUT

RECORDING SET

OTHERS

SELECT WITH [CURSORS]

THEN PRESS [ENTER]

MONITOR TYPE

F-1 INPUT

L-1 INPUT

DISPLAY SET

L-1 OUTPUT

L-2 SELECT

4:3LB

VIDEO

SCART VIDEO

S-VIDEO

S-VIDEO/RGB

VIDEO/RGB

SAT S-VIDEO/RGB

EXIT

SELECT

SET UP

DECODER

DVD SET UP

FUNCTION SET UP

INITIAL SET UP

VIDEO IN/OUT

RECORDING SET

OTHERS

SELECT WITH [CURSORS]

THEN PRESS [ENTER]

MONITOR TYPE

F-1 INPUT

L-1 INPUT

DISPLAY SET

L-1 OUTPUT

L-2 SELECT

4:3LB

VIDEO

SCART VIDEO

S-VIDEO/RGB

S-VIDEO

VIDEO

EXIT

SELECT

SET UP

M100SEK_00.book Page 59 Tuesday, March 22, 2005 5:31 PM

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 79 80

Comments to this Manuals

No comments

Jvc DR-M100S User Manual Page 59

Comments to this Manuals

Related products and manuals for Televisions Jvc DR-M100S