Jvc DR-M100S User Manual download pdf (Page 66)

Filename [M100SEK_10Subsidiary.fm]

Masterpage:Left+

66 EN

SUBSIDIARY SETTINGS

Your unit needs to memorise all necessary stations in channel

positions in order to record TV programmes. Auto Channel Set

automatically assigns all receivable stations in your area to call

them up by using the PR +/– buttons without going through any

vacant channels.

Auto Channel Set

1 Press SET UP to access the Main Menu screen.

2 Press selection keys to select AINITIAL SET UPB, then press

ENTER for confirmation.

3 Press selection keys to select AAUTO CH SETB, then press

ENTER for confirmation

● When you have connected the unit to a TV offering T-V Link via

a fully-wired 21-pin SCART cable (A pg. 17), the unit

automatically performs the Preset Download and the T-V LINK

screen will appear. (A pg. 20)

● The Auto Set screen appears, and remains on screen while the

unit searches for receivable stations.

4 After completing Auto Channel Set, press ENTER.

When Auto Channel Set is completed, ASCAN COMPLETEDB

appears on screen

5 Press SET UP to complete the setting.

● Using the Confirmation screen, you can skip or add channel

positions, enter station names and perform other operations.

Refer to pages 67 - 68 for the procedures.

● Depending on reception conditions, the stations may not be

stored in order, and the station names may not be stored

correctly.

NOTES:

● Fine tuning is performed automatically during Auto Channel Set.

If you want to perform tuning manually, refer to AFine-Tuning

Channels Already StoredB (A pg. 68).

● If you perform Auto Channel Set when the aerial cable is not

connected properly, ASCAN COMPLETED-NO SIGNAL-B

appears on the TV screen in step 4. In such a case, make sure of

the aerial connection and press ENTER; Auto Channel Set will

start again.

Tuner Set

● Turn on the unit.

● Turn on the TV and select an input mode such as EXT1.

IMPORTANT:

Perform the following steps only if ^

^ Auto Channel Set has not been set correctly by Auto Set Up

or by Preset Download. (A pg. 18, 19)

^ you have moved to a different area or if a new station starts

broadcasting in your area.

SET UP

(FGDE)

ENTER

Selection Keys

IMPORTANT:

● In certain reception conditions, station names may not be

stored correctly, and Auto Guide Programme Number Set may

not work properly. When the Guide Programme numbers are

not set properly, the programme that you do not intended to

record will be timer recorded by the VIDEO Plus+ system of

the unit. When programming the timer using the VIDEO Plus+

system, be sure to check the desired channel is selected

correctly. ACheck, Cancel And Change ProgrammesB

(A pg. 42)

● Your unit memorises all receivable stations even if reception of

some of them is poor. You can delete those stations with an

unacceptable picture from the list. (A pg. 67, ADelete A

ChannelB)

M100SEK_00.book Page 66 Tuesday, March 22, 2005 5:31 PM

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 79 80

Comments to this Manuals

No comments

Jvc DR-M100S User Manual Page 66

Comments to this Manuals

Related products and manuals for Televisions Jvc DR-M100S