JVC UX-A70MD User Manual download pdf (Page 18)

– 13 –

English

Setting the Display Illumination

You can change the illumination color and brightness of the

electronic swing panel and display window.

To set the illumination color

You can select the illumination color by your preference.

Press to turn on the unit.

Press COLOR repeatedly until the color you want

appears in the main display.

• Each time you press the button, the illumination color

changes as follows:

* If you select “RANDOM,” the unit will select one

from 9 preset colors at random as the illumination

color every two seconds automatically.

** If you select “M1” or “M2,” you can use a custom

color. See “To create your favorite colors” to the

right.

More on the display color

• The colors shown in the display cannot always be reproduced

precisely. Due to the circumstances (room temperature, etc.)

where the unit is used, colors may vary slightly.

• When you change the color of the display, the display may seem

to move back and forth; this is a characteristic of this unit and is

not a malfunction.

• When a strong light strikes the display, the display happens to

become dark, but this is not a malfunction.

To create your favorite colors

You can create two favorite colors and store them in

memory as “M1” and “M2.”

On the remote control ONLY:

Press to turn on the unit.

Press COLOR repeatedly until “M1” or “M2”

appears in the main display.

The value of “R (red)” starts flashing.

To adjust the brightness of each color

1) Press Ø and ø to select the color you want to

adjust.

2) Press ¢ or 4 repeatedly to adjust the value

of the brightness (between 0 – 6.)

• As you increase the number, the color becomes

brighter.

3) Repeat steps

–1) and

–2) to find your favorite

color.

Press SET while flashing.

“MEMORY” appears in the main display and the

setting is finished.

• Even if you do not press SET, the unit will finish the

color setting mode automatically.

To dim the display illumination

To dim the brightness, press DIMMER.

• When you press DIMMER while the illumination color

is set to “M1” or “M2,” the illumination color is changed

to light blue.

To resume the brightness, press DIMMER again.

Ex.“M1” is selected. “M1” is already set to “R (red) 0

G (green) 1 B (blue) 1.”

Ex. Both “M1” and “M2” are set to “R0 G1 B1” at the

shipment (see also the right column.)

(blue)

(light blue)

(green)

(yellow)

(orange)

(red)

(pink)(purple)

(white)

EN10-13.UX-A70MD[USUBUJ]_f 00.12.4, 4:30 PM13

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 53 54

Comments to this Manuals

No comments

JVC UX-A70MD User Manual Page 18

Comments to this Manuals

Related products and manuals for CD players JVC UX-A70MD