JVC UX-A70MD User Manual download pdf (Page 13)

– 8 –

English

Connecting Other Equipment

You can connect the following equipment which can be

used as a playback and recording device. By using the

cassette deck, for example, you can record any source

played back on this unit.

When you connect and use the equipment, refer also to its

manual supplied.

• DO NOT connect other equipment while the

power is on.

• DO NOT plug in any equipment until all

connections are complete.

To connect another component such as a cassette

deck

Be sure that the plugs of the audio cords and the jacks on

the rear of the unit are color-coded: White plugs and jacks

are for left audio signals, and red ones for right audio

signals.

By using audio cords (not supplied), connect:

• Between the audio input jacks on the cassette deck and

the LINE OUT jacks — For recording on the cassette

deck.

• Between the audio output jacks on the cassette deck and

the LINE IN jacks — For playing a tape.

To connect speakers

You can connect the speakers using the speaker cords.

If cords are covered with insulation, twist the core

of the cord at the end of each cord, then remove the

insulation.

Open the speaker terminal.

Insert the end of the speaker cord to the terminal.

Match the polarity of the speaker terminals: White (+)

to red (+) and black (–) to black (–).

Close the speaker terminal on the rear of the unit.

Use only speakers with the same speaker impedance as

indicated by the speaker terminals on the rear of the unit.

Speaker cord

Black

Rear of the right

speaker

Rear of the left

speaker

Red

Speaker terminals

3,42

–

AM EXT

AM LOOP

FM(75Ω)

COAXIAL

ANTENNA

110V

127V

230V

VOLTAGE

SELECTOR

To output (PLAY)

To input (REC)

Ex. Cassette deck

Continued

EN01-09.UX-A70MD[USUBUJ]_f 00.12.4, 4:30 PM8

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 53 54

Comments to this Manuals

No comments

JVC UX-A70MD User Manual Page 13

Comments to this Manuals

Related products and manuals for CD players JVC UX-A70MD