JVC UX-A70MD User Manual Page 37

  • Download
  • Add to my manuals
  • Print
  • Page
    / 54
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 36
– 32 –
English
6
Press Ø or ø to adjust the dividing point
precisely.
When you stop pressing the buttons, the unit repeats the
newly selected dividing point.
You can shift the dividing point up to ±128. This
range (±128) corresponds to approximately ±8
seconds* from the original point (Position 0).
When you find the right position, go to the next step.
If you want to cancel the dividing point, press
CANCEL, then select the correct dividing point.
7
Press SET.
“PUSH ENTER” appears in the main display.
8
Press ENTER to finish the editing procedure.
“EDITING” appears for a while, then “UTOCwriting”
flashes while the editing you have made is being
recorded on the MD.
To join the divided tracks again, see the JOIN Function.
JOIN Function
This function allows you to join two adjacent tracks into
one track.
To stop any time during editing process, press
TITLE/EDIT.
1
Insert an MD you want to edit into the MD loading
slot.
2
Press TITLE/EDIT repeatedly until “JOIN ?”
appears in the main display.
The source is changed to “MD.
Each time you press TITLE/EDIT, the edit mode
changes as follows:
DIVIDE Function
This function allows you to divide one track into two
separate tracks. It is useful, for example, when you want to
add track marks at a certain point within a track or if you
want to separate a recording.
To stop any time during editing process, press
TITLE/EDIT.
1
Insert an MD you want to edit into the MD loading
slot.
2
Press TITLE/EDIT repeatedly until “DIVIDE ?”
appears in the main display.
The source is changed to “MD.
Each time you press TITLE/EDIT, the edit mode
changes as follows:
3
Press SET.
The unit starts playing back the first track (or the
current track.)
4
Press ¢ or 4 to select the track you want to
divide.
The unit starts playing back the selected track.
You can also press the number button(s) to directly
select the track you want to divide.
If you do not press ¢, 4, or the number
button(s), the current track is played back repeatedly.
5
Press SET when you find the point where you want
to divide the track.
“POSIT. 0?” appears in the main display, and the unit
repeats the selected point — a 3-second period
following the dividing point.
If the dividing point is satisfactory, go to step
7
.
If not, go to the next step.
Ex. The dividing point is shifted to “– 21.”
DISC TITLE?
MOVE ?
ERASE?
DIVIDE ? JOIN ?
ALL ERASE?
Playback mode
(canceled)
DISC TITLE?
MOVE ?
ERASE?
DIVIDE ? JOIN ?
ALL ERASE?
Playback mode
(canceled)
Continued
* When “SP” is selected for the recording length
mode. For “LP2,” it is approximately ±16 seconds,
and for “LP4” approximately ±32 seconds.
EN30-34.UX-A70MD[USUBUJ]_f 00.12.4, 4:31 PM32
Page view 36
1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 53 54

Comments to this Manuals

No comments