JVC KD-LX555R User Manual download pdf (Page 17)

ENGLISH

LVT1008-001A [E/EX]

Changing the display mode while

listening to an FM station

You can change the initial indication on the

display to either station name (PS NAME) or to

station frequency (FREQUENCY), while listening

to an FM RDS station.

• See also “Changing the general settings

(PSM)” on page 31.

1 Press and hold SEL (S) for more than 2

seconds so that one of the PSM items appears

on the display.

2 Press ¢ or 4 to select “TUNER

DISP (display).”

3 Turn the control dial to set to the desired

indication (“PS NAME” or “FREQUENCY”).

4 Press SEL (S) to finish the setting.

Note:

By pressing DISP (D), you can change the display

while listening to an FM RDS station.

Each time you press the button, the following

information appears on the display:

• Then, the display goes back to the original

indication in several seconds.

Setting the TA volume level

You can preset the volume level for TA Standby

Reception. When a traffic programme is

received, the volume level automatically changes

to the preset level.

• See also “Changing the general settings

(PSM)” on page 31.

1 Press and hold SEL (S) for more than 2

seconds so that one of the PSM items appears

on the display.

2 Press ¢ or 4 to select “TA VOL

(volume).”

3 Turn the control dial to set to the desired

volume.

You can set it from “TA VOL 00” to “TA VOL

50.”

4 Press SEL (S) to finish the setting.

Automatic clock adjustment

When shipped from the factory, the clock built in

this unit is set to be readjusted automatically

using the CT (Clock Time) data in the RDS

signal.

If you do not want to use automatic clock

adjustment, follow the procedure below.

• See also “Changing the general settings

(PSM)” on page 31.

1 Press and hold SEL (S) for more than 2

seconds so that one of the PSM items appears

on the display.

2 Press ¢ or 4 to select “AUTO ADJ

(adjustment).”

3 Turn the control dial to select “ADJUST OFF.”

Now automatic clock adjustment is canceled.

4 Press SEL (S) to finish the setting.

To reactivate clock adjustment, repeat the same

procedure and select “ADJUST ON” in step 3.

Note:

You must stay tuned to the same station for more than

2 minutes after setting “AUTO ADJ” to “ADJUST

ON.” Otherwise, the clock time will not be adjusted.

(This is because the unit takes up to 2 minutes to

capture the CT data in the RDS signal.)

Station name

(PS NAME)

Programme type

(PTY)

Station frequency

(FREQUENCY)

EN12-18KD-LX555R[E]f.p65 02.12.11, 16:3017

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 57 58

Comments to this Manuals

No comments

JVC KD-LX555R User Manual Page 17

Comments to this Manuals

Related products and manuals for Car media receivers JVC KD-LX555R