JVC RX-80PGD User Manual download pdf (Page 36)

Page 33

English

5. Press Control % / ﬁ until “CNT MODE” (Center Mode) appears on the display.

6. Press Control @ / # to select the center mode.

Each time you press the button, the center modes change as follows:

WIDE: Select this mode when the center speaker can reproduce the bass better than the

front speakers. All signals of the center channel are output through the center

speaker.

NORMAL: Select this mode when the center speaker cannot reproduce the bass better than

the front speakers. The bass portions of the center channel signals are output

through the front speakers.

PHANTOM: Select this mode when you do not use a center speaker. The center speaker channel

signals are output through the front speakers.

OFF: Select this mode to turn off the center speaker channel.

Notes:

• If you have already set the “center speaker size” following the procedure described on page 17, you do not

have to select the center mode in this procedure.

• When you have selected “3CHLOGIC,” you cannot select “PHANTOM.”

7. Press Control % / ﬁ until “–DELAY +” appears on the display.

8. Press Control @ / # to adjust the delay time of the rear speaker output.

Each time you press the button, the delay time changes as follows:

DELAY 1: Select this when the distance from you to your rear speakers is greater than that

to the front speakers.

DELAY 2: Select this when the distance from you to your rear speakers is almost equal to

that to the front speakers.

DELAY 3: Select this when the distance from you to your rear speakers is a little less than

that to the front speakers.

DELAY 4: Select this when the distance from you to your rear speakers is much less than

that to the front speakers.

Note:

When you have selected “3CHLOGIC,” you cannot adjust the delay time.

9. Press Control % / ﬁ until “TEST” appears on the display, then press Control @ / # to start

checking the speaker output balance.

“TEST” starts flashing on the display, and a test tone comes out of the speakers in the following

order:

Notes:

• No test tone comes out of the rear speakers when you have selected “3CHLOGIC.”

• No test tone comes out of the center speaker when you select “PHANTOM” or “OFF” for the center

mode.

WIDE

NORMAL

OFF

PHANTOM

Front panel

DELAY 1

DELAY 2

DELAY 4

DELAY 3

Left front speaker

Center speaker

Rear speakers

Right front speaker

EN26-36.RX-80P[UF]/f 98.8.31, 1:49 PM33

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 55 56

Comments to this Manuals

No comments

JVC RX-80PGD User Manual Page 36

Comments to this Manuals

Related products and manuals for AV receivers JVC RX-80PGD