JVC RX-6500VBK User Manual download pdf (Page 24)

English

Adjusting the DAP Modes and

Headphones mode

Once you have adjusted the DAP modes, the adjustment is

memorized for each DAP mode.

Before you start, remember...

• Make sure that you have set the speaker information correctly

(see page 12).

• There is a time limit in doing the following steps. If the setting is

canceled before you finish, start from step 1 again.

• You cannot adjust the rear speaker output level when you have set

“REAR SPK” to “NONE.” See page 12.

• You cannot make any adjustment for the headphones mode.

On the front panel:

1. Press DSP MODE repeatedly until

the DAP mode — LIVE CLUB,

DANCE CLUB, HALL,

PAVILION, or HEAD PHONE —

appears on the display.

The DSP indicator also lights up on the display. (When the

HEAD PHONE is selected, HEAD PHONE indicator lights up,

instead of the DSP indicator.)

• When you have set “REAR SPK” to “NONE,” the 3D-

PHONIC indicator also lights up. (Except for “HEAD

PHONE.”)

2. Adjust the speaker output levels.

1) Press ADJUST repeatedly until one of

the following indications appears on

the display.

“REAR L LEVEL”:

To adjust the left rear speaker level.

“REAR R LEVEL”:

To adjust the right rear speaker level.

• Once you have pressed ADJUST, MULTI CURSOR % / ﬁ

can be also used for selecting the speaker.

2) Press MULTI CURSOR @ / # to

adjust the selected speaker output

level (from –10 dB to +10 dB).

3) Repeat 1) and 2) to adjust the other

speaker output level.

3. Adjust the effect level.

1) Press ADJUST repeatedly until “DSP

EFFECT” appears on the display.

• Once you have pressed ADJUST,

MULTI CURSOR % / ﬁ can be also

used for selecting “DSP EFFECT.”

• The display changes to show the

current setting.

2) Press MULTI CURSOR @ / # to

select the effect level.

• As you press it, the effect level

changes as follows:

As the number increases, the selected DAP mode becomes

stronger.

Adjusting the 3D-PHONIC Modes

Once you have adjusted the 3D-PHONIC modes, the adjustment is

memorized for each 3D-PHONIC mode.

Before you start, remember...

• Make sure that you have set the speaker information correctly

(see page 12).

• There is a time limit in doing the following steps. If the setting is

canceled before you finish, start from step 1 again.

On the front panel:

1. Press DSP MODE repeatedly until

“3D ACTION” or “3D

THEATER” appears on the

display.

The 3D-PHONIC, DSP, and Ÿ PRO LOGIC indicators also

light up on the display.

2. Adjust the effect level.

1) Press ADJUST repeatedly until “DSP

EFFECT” appears on the display.

• Once you have pressed ADJUST,

MULTI CURSOR % / ﬁ can be also

used for selecting “DSP EFFECT.”

• The display changes to show the

current setting.

2) Press MULTI CURSOR @ / # to

select the effect level.

• As you press it, the effect level

changes as follows:

As the number increases, the selected 3D-PHONIC mode

becomes stronger.

From the remote control:

1. Press SURROUND MODE

repeatedly until “3D ACTION” or

“3D THEATER” appears on the

display.

The 3D-PHONIC, DSP, and Ÿ PRO LOGIC indicators also

light up on the display.

2. Press SOUND.

The 10 keys are activated for sound adjustments.

3. Press EFFECT to select an effect

level you want.

• Each time you press the button, the effect

level changes as follows:

As the number increases, the selected 3D-PHONIC mode

becomes stronger.

DSP MODE

ADJUST

MULTI CURSOR

DSP EFFECT 1 DSP EFFECT 2 DSP EFFECT 3

DSP EFFECT 4DSP EFFECT 5

SURROUND

MODE

SOUND

DSP EFFECT 1 DSP EFFECT 2 DSP EFFECT 3

DSP EFFECT 4DSP EFFECT 5

EFFECT

DSP MODE

ADJUST

MULTI CURSOR

ADJUST

MULTI CURSOR

DSP EFFECT 1 DSP EFFECT 2 DSP EFFECT 3

DSP EFFECT 4DSP EFFECT 5

EN18_25.RX-6500V[J] 99.12.16, 1:06 PM21

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 40 41

Comments to this Manuals

No comments

JVC RX-6500VBK User Manual Page 24

Comments to this Manuals

Related products and manuals for AV receivers JVC RX-6500VBK