JVC RX-6500VBK User Manual download pdf (Page 11)

English

Turning the Power On and Off (Standby)

On the front panel:

To turn on the power, press POWER.

The STANDBY lamp goes off. The name of the

current source (or station frequency) appears on

the display.

To turn off the power (into standby mode),

press POWER again.

The STANDBY lamp lights up. A small amount

of power is consumed in standby mode. To turn

the power off completely, unplug the AC power

cord.

From the remote control:

To turn on the power, press AUDIO POWER.

The STANDBY lamp goes off. The name of the

current source (or station frequency) appears on

the display.

To turn off the power (into standby mode),

press AUDIO POWER again.

The STANDBY lamp lights up.

Selecting the Source to Play

Press one of the source selecting buttons.

On the front panel:

From the remote control:

Basic Operations

The following operations are commonly used when you play any sound source.

DVD Select the DVD player for viewing the stereo

digital video disc.

TV SOUND/DBS Select the TV sound (or the DBS tuner).

VCR Select the video component connected to the

VCR jacks.

CD * Select the CD player.

TAPE/MD * Select the cassette deck (or the MD recorder).

PHONO * Select the turntable.

FM/AM * Select an FM or AM broadcast.

• Each time you press the button, the band

alternates between FM and AM.

Notes:

• When connecting an MD recorder (to the TAPE/MD jacks) or a DBS

tuner (to the TV SOUND/DBS jacks), change the source name that

appears on the display. See page 11 for details.

• When you press one of the source selecting buttons on the remote

control marked above with an asterisk (

), the receiver

automatically turns on.

Signal and speaker indicators on the display

• The signal indicators light up to indicate the incoming channel

signals.

– Only the indicators for the incoming signals light up. (When

analog input is selected, “L” and “R” always light up.)

• The frame of the signal indicator (except for “LFE”: See notes

below) lights up if the corresponding speaker is set to “LARGE”

or “SMALL” (for subwoofer, “YES”).

L: Light up when the left front channel signal comes in.

The frame of this signal indicator always lights up.

R: Light up when the right front channel signal comes in.

The frame of this signal indicator always lights up.

C: Light up when the center channel signal comes in.

LS: Light up when the left rear channel signal comes in.

RS: Light up when the right rear channel signal comes in.

S: Light up when the monaural rear channel signal comes in.

LFE: Light up when the LFE channel signal comes in.

Notes:

• When the

LFE

channel signal comes in, “LFE” lights up.

• When “SUBWOOFER” is set to “YES,” (See page 15)

SUBWFR

lights up.

STANDBY

POWER

Selected source name appears

Current source name appears

Current volume level is shown here

STANDBY

POWER

AUDIO

DVD

TV SOUND/DBS

TAPE/MD

VCR

PHONO

SOURCE NAME

FM/AM

TV SOUND/ DBS

VCR

PHONO

DVD

TAPE/MD FM/AM

LFESUBWFR

EN08_17.RX-6500V[J] 99.12.16, 1:08 PM8

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 40 41

Comments to this Manuals

No comments

JVC RX-6500VBK User Manual Page 11

Comments to this Manuals

Related products and manuals for AV receivers JVC RX-6500VBK