32 ENGLISH
Category
Menu item Selectable setting, [ Initial: Underlined ]
Color Setup
Day Color • Button Zone
•
Display Zone
: For settings, 37.
Night Color
Menu Color
• On
• Off
: Changes the display and buttons (except for
0
/
DISP
) illumination during menu, list search and
playback mode operations.
: The display and buttons illuminate in the color that
you have set.
Ring Color *
3
• On
• Off
: When a call comes in, the display will flash in blue.
• The display will change to the original color when
the call is answered or the incoming call stops.
When the unit receives a text message, the display
only illuminate in blue.
: Cancels.
Audio
Fad/Bal *
4,
*
5
Fader/balance
R6 – F6, [ 0 ]
L6 – R6, [ 0 ]
: Fad (fader): Press
5
/
∞
to adjust the front and rear
speaker output balance.
: Bal (balance): Press
4
/
¢
to adjust the
left and right speaker output balance.
Loud
Loudness
•
Loud 1/2/3
• Off
: Boost low and high frequencies to produce a well-
balanced sound at a low volume level.
: Cancels.
Volume
Adjust
Level –5 —
Level +5,
[ Level 0 ]
: Preset the volume adjustment level of each source
(except FM), compared to the FM volume level. The
volume level will automatically increase or decrease
when you change the source.
• Before making an adjustment, select the source
you want to adjust.
• “FIX” appears on the display if “FM” is selected as
the source.
Subwoofer • LPF
• Level
• Phase
: Turn the control dial to select the cutoff frequency
to the subwoofer.
Off: All signals are sent to the subwoofer.
LPF 55Hz/LPF 85Hz/LPF 120Hz: Frequencies
higher than 55 Hz/85 Hz/120 Hz are cut off.
: Turn the control dial to adjust the subwoofer
output level. Level 00 to Level 08 [ Level 04 ]
: Turn the control dial to select the subwoofer
phase. 0deg (normal) or 180deg (reverse)
*
3
Displayed only when USB Bluetooth adapter, KS-UBT1 is connected.
*
4
If you are using a two-speaker system, set the fader level to <0>.
*
5
This adjustment will not affect the subwoofer output.
EN30-39_KW-XR810[J]2.indd 32EN30-39_KW-XR810[J]2.indd 32 1/20/10 3:14:28 PM1/20/10 3:14:28 PM
Comments to this Manuals