JVC KD-G111 User Manual download pdf (Page 17)

17

ENGLISH

More about this receiver

Basic operations

Turning off the power

• If you turn off the power while listening to a

disc, disc play will start from where playback

has been stopped previously, next time you

turn on the power.

Tuner operations

Storing stations in memory

• During SSM search...

– All previously stored stations are erased and

stations are stored newly.

– Received stations are preset in No. 1 (lowest

frequency) to No. 6 (highest frequency).

– When SSM is over, the station stored in

No. 1 will be automatically tuned in.

• When storing a station manually, a previously

preset station is erased when a new station is

stored in the same preset number.

Disc operations

General

• This receiver has been designed to reproduce

CDs, and CD-Rs (Recordable)/CD-RWs

(Rewritable) in audio CD (CD-DA) format.

• When a disc has been loaded, selecting “CD”

for the playback source starts disc play.

Inserting a disc

• When a disc is inserted upside down, the disc

automatically ejects.

• Do not insert 8 cm discs (single CD) and

unusual shape discs (heart, flower, etc) into

the loading slot.

Playing a CD-R or CD-RW

• Use only “finalized” CD-Rs or CD-RWs.

• This receiver can play back multi-session

discs; however, unclosed sessions will be

skipped while playing.

• Some CD-Rs or CD-RWs may not play

back on this receiver because of their disc

characteristics, and for the following causes:

– Discs are dirty or scratched.

– Moisture condensation occurs on the lens

inside the receiver.

– The pickup lens inside the receiver is dirty.

– CD-R or CD-RW on which the files are

written with “Packet Write” method.

– There are improper recording conditions

(missing data, etc.) or media conditions

(stain, scratch, warp, etc.).

• CD-RWs may require a longer readout time

since the reflectance of CD-RWs is lower

than that of regular CDs.

• Do not use the following CD-Rs or

CD-RWs:

– Discs with stickers, labels, or protective seal

stuck to the surface.

– Discs on which labels can be directly

printed by an ink jet printer.

Using these discs under high temperatures

or high humidity may cause malfunctions or

damage to discs.

Changing the source

• If you change the source, playback also stops

(without ejecting the disc).

Next time you select “CD” for the playback

source, disc play starts from where it has been

stopped previously.

Ejecting a disc

• If the ejected disc is not removed within

15 seconds, the disc is automatically inserted

again into the loading slot to prevent it from

dust. (Disc will not play this time.)

General settings—PSM

• If you change the “AMP GAIN” setting from

“HIGH PWR” to “LOW PWR” while the

volume level is set higher than “VOL 30,” the

receiver automatically changes the volume

level to “VOL 30.”

EN14-19_KD-G111[EX_EU]f.indd 17 10/8/04, 12:15:41 PM

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 37 38

Comments to this Manuals

No comments