Jvc SR-V10U User Manual Page 33

  • Download
  • Add to my manuals
  • Print
  • Page
    / 64
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 32
EN
33
8
Set tape speed
Press SP/EP to set the tape speed.
9
Return to normal screen
Press PROG. or OK.
“PROGRAM COMPLETED” appears on the
screen for about 5 seconds, then normal screen
appears.
If “PROGRAM NOT COMPLETED PROGRAM
OVERLAP” appears, you have another program
overlapping the program you have just made.
The Program Check screen appears and
conflicting programs will start blinking.
You can now correct the conflicting programs.
See “When programs overlap each other” on
page 36.
0
Engage timer recording standby mode
Press TIMER.
The VCR turns off automatically and “” is
displayed on the front display panel.
To timer-record daily (Sunday–Saturday) or weekly
serials
Press DAILY (number “8”) or WEEKLY (number “9”)
anytime during steps 3 through 9.
“DAILY” or “WEEKLY” appears on the Program screen.
Pressing the button again makes the corresponding
indication disappear.
To use the VCR while it is in timer recording standby
mode
Press TIMER to cancel the timer recording standby
mode, then press POWER to turn on the VCR.
DO NOT forget to put the VCR into timer recording
standby mode again by pressing TIMER after you use the
VCR; otherwise, you cannot record the broadcast you
want.
When “AUTO TIMER” is set to “ON” (Z pg. 37, 38),
the timer recording standby mode is automatically
engaged when the VCR is turned off. It is temporarily
canceled when the VCR is turned on. You do not have
to press TIMER to engage or disengage the timer
recording standby mode.
NOTES:
In case of a power failure after programming, the recorder's
memory backup keeps your selections (if the lithium battery is
not exhausted).
Programs that start after midnight must have the next day’s
date.
After timer recording is completed, the VCR turns off
automatically.
You can program the timer recording while a regular
recording is in progress.
To timer-record cable channels, be sure to keep the cable box
turned on with the correct channel selected.
Page view 32
1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 63 64

Comments to this Manuals

No comments