JVC MX-KC50 User Manual download pdf (Page 29)

Troubleshooting

• If you are having a problem with your System, check this list for a possible solution before calling for service.

• If you cannot solve the problem from the hints given here, or the System has been physically damaged, call a qualified person, such as

your dealer, for service.

Symptom Possible Cause Action

No sound is heard. • Connections are incorrect, or loose.

• Headphones are connected.

• Check all connections and make cor-

rections. (See pages 4 to 6.)

• Disconnect the headphones.

Poor radio reception • The antenna is disconnected.

• The AM Loop Antenna is too close

to the System.

• The FM Wire Antenna is not prop-

erly extended and positioned.

• Reconnect the antenna securely.

• Change the position and direction of

the AM Loop Antenna.

• Extend FM Wire Antenna to the best

reception position.

The disc tray does not open.

• The AC power cord is not plugged in.

• Tray is locked.

• Plug the AC power cord.

• Unlock the tray. (See page 15.)

The CD skips. The CD is dirty or scratched. Clean or replace the CD. (See page 25.)

The CD does not play. The CD is upside down. Put the CD in with the label side up.

The MP3

/WMA

disc does not play.

• No MP3/WMA files are recorded on

the disc.

•MP3

/WMA

files do not have the file

extension —.wma or .mp3 in thier

file names.

•MP3

/WMA

files are not recorded in

the format compliant with ISO 9660

Level 1 or Level 2.

Replace the disc.

The readout time of the MP3

/WMA

disc

is too long.

The readout time varies with the com-

plexity of the recording configuration.

Do not use too many hierarchies and

folders when recording. Also, do not

record any other types of audio tracks

together with MP3

/WMA

files. (See

page 11.)

The cassette holder cannot be opened. During tape playing, the power cord

was unplugged.

Plug in the power cord, and turn on the

System.

Unable to record. Cassette record protect tabs are re-

moved.

Cover holes on back edge of cassette

with tape.

Unable to operate the Remote Control. • The path between the Remote Con-

trol and the sensor on the Unit is

blocked.

• The batteries have lost their charge.

• Remove the obstruction.

• Replace the batteries.

Operations are disabled. The built-in microprocessor has mal-

functioned due to external electrical in-

terference.

Unplug the System then plug it back in.

“PROTECT” appears on the display,

then the power goes off.

The speaker wire leads come in contact

with each other.

Check the connections and make cor-

rections. (See page 5.)

1 2 ... 24 25 26 27 28 29 30 31 32

Comments to this Manuals

No comments

JVC MX-KC50 User Manual Page 29

Comments to this Manuals

Related products and manuals for CD players JVC MX-KC50