JVC MX-KC50 User Manual download pdf (Page 21)

Using the Cassette Deck (Recording)

Standard Recording

To Record Any Sound Source to Tape

Follow these steps to record from any sound source onto a tape in

Deck B.

Insert a blank or erasable tape into the Deck

B and wind past the tape leader.

Prepare the source, by, for example, tuning

in a radio station, loading CDs, or turning on

connected equipment.

• For CD recording, see “CD Synchro Recording” mentioned

below.

• For dubbing, see “Tape to Tape Recording (DUBBING)”

described below.

Press the REC START/STOP button on the

Unit.

The “REC” indicator lights up and the System begins record-

ing.

The Tape indicator (3) blinks on the display.

• If the tab of the cassette tape on the Deck B is removed to

prevent erasure or recording, “NO REC” will appear on the

display.

To stop during recording, press the REC START/STOP but-

ton on the Unit, or press the 7 button.

Recording an AM Station to Tape (Beat Cut)

When recording an AM broadcast, beats may be produced which are

not heard when listening to the broadcast. If this happens, press the

FM MODE button on the Remote Control to eliminate the beats.

Set to AM station and start recording.

Press the FM MODE button on the Remote

Control to eliminate the beats.

Each time you press the button, the display changes as shown

below:

BEAT 1 ï BEAT 2

CD Synchro Recording

Everything on the CD goes onto the tape in the order it is on the

CD, or according to the order you have set in a program.

Prepare CDs. (See page 12.)

Press the CD1-3 button (that you want to make recording), and

then press the 7 button.

• If you want to record specific tracks only, you need to pro-

gram the tracks beforehand. (See page 14.)

• If you want to record one CD only, you need to load one

CD only.

Insert a blank or erasable tape into the Deck

B and wind past the tape leader.

Press the CD REC START button on the Unit.

“CD REC” appears on the display and the “REC” indicator

lights up. Then, the System begins CD Synchro Recording and

the tracks on the CD are recorded on the tape.

When recording of the tracks of all CDs is finished, the CD

Player and Cassette Deck stop.

• If the tab of the cassette tape on the Deck B is removed to

prevent erasure or recording, “NO REC” will appear on the

display.

• After the CD Player has played the entire CD or all the pro-

grammed tracks, the tape automatically stops.

To stop at any time during the recording process, press

the 7 button. The CD Player and Cassette Deck stop.

• If the CD REC START button is pressed when “RESUME”

is displayed (see page 14), CD Synchro Recording will be

started from the beginning of the first track.

• When making SLEEP timer settings while doing CD Syn-

chro recording, set enough time to allow for the CD to fin-

ish playing, otherwise the power will go off before

recording is completed.

Tape to Tape Recording (DUB-

BING)

Recording from one tape to another is called dubbing.

You can dub tapes simply, with just a single button.

Press the TAPE A 3 button, and then press

the 7 button.

Insert the source cassette you want to copy

from into Deck A for playback.

Insert a blank or erasable cassette you want

to copy onto into Deck B for recording.

Press the DUBBING button on the Unit.

Deck A and Deck B will start simultaneously and the “REC”

indicator lights up.

During dubbing, the Deck indicators “A” and “B” light up al-

ternately.

• If no tape is inserted into Deck A, “NO TAPE” will appear

on the display.

• If no tape is inserted into Deck B, “NO TAPE” will appear

on the display.

To stop dubbing, press the REC START/STOP button on the

Unit or the 7 button.

• During dubbing, you can hear sound effects through the

speakers or headphones. However, the sound is dubbed

without sound effects.

Tape travelling direction

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 31 32

Comments to this Manuals

No comments

JVC MX-KC50 User Manual Page 21

Comments to this Manuals

Related products and manuals for CD players JVC MX-KC50