JVC MX-K50 User Manual download pdf (Page 30)

– 25 –

English

If you are having a problem with your unit, check this list for a possible solution before calling for service.

If you cannot solve the problem from the hints given here, or the unit has been physically damaged, call a qualified person,

such as your dealer, for service.

Troubleshooting

Symptom

Unable to cancel the display demonstration.

No sound is heard.

Hard to listen to broadcasts because of

noise.

The disc sound is discontinuous.

The carrousel does not open or close.

The disc does not play.

The cassette holders cannot be opened.

Impossible to record.

Stereo effect is lost.

Operations are disabled.

Unable to operate the unit from the remote

control.

Cause

Other buttons are pressed to cancel the

display demonstration.

Connections are incorrect or loose.

• Antennas are disconnected.

• The AM loop antenna is too close to the

unit.

• The FM antenna is not properly extended

and positioned.

The disc is scratched or dirty.

• The AC power cord is not plugged in.

• The carrousel is locked.

The disc is placed upside down.

Power supply from the AC power cord has

been cut off while the tape was running.

Small tabs on the back of the cassette are

removed.

Vocal Masking is activated.

The built-in microprocessor may

malfunction due to external electrical

interference.

• The path between the remote control and

the remote sensor on the unit is blocked.

• The batteries are exhausted.

Action

Press CANCEL/DEMO on the unit. (See

page 8.)

Check all connections and make

corrections. (See pages 6 to 8.)

• Reconnect the antennas correctly and

securely.

• Change the position and direction of the

AM loop antenna.

• Extend the FM antenna at the best

position.

Clean or replace the disc. (See page 24.)

• Plug the AC power cord.

• Unlock the carrousel. (See page 16.)

Place the disc with the label side up.

Turn on the unit.

Cover the holes with adhesive tape.

Cancel the Vocal Masking. (See page 20.)

Unplug the AC power cord and then plug it

back in.

• Remove the obstruction.

• Replace the batteries.

EN18-26.MX-K50[U].pm6 02.5.21, 11:21 AM25

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 63 64

Comments to this Manuals

No comments

JVC MX-K50 User Manual Page 30

Comments to this Manuals

Related products and manuals for Cassette players JVC MX-K50