Jvc KW-AVX746 User Manual download pdf (Page 38)

ENGLISH

Setting menu items

• You cannot change <Audio> settings (except <Amplifier Gain>) when the AV source is turned off.

Menu item Selectable setting/item Initial: Underlined

Audio

Fader/Balance Fader : Adjust the front and rear speaker output balance.

♦ F6 to R6; Initial 0

• When using a two-speaker system, set the fader to the center (0).

Balance : Adjust the left and right speaker output balance.

♦ L6 to R6; Initial 0

Press [ 5/∞/2/3 ] or drag [

] to adjust.

• To clear the adjustment, press [Center].

Equalizer

Change the sound mode or adjust and store the equalization for each source.

(☞ page 31)

♦ Flat/Natural/Dynamic/Vocal Boost/Bass Boost/Vibrant/User

Loudness You can activate/deactivate the loudness function.

♦ Off

♦ On

: Cancels.

: Boost low and high frequencies to produce a well-

balanced sound at a low volume level.

Crossover

Adjust the cross over frequency. (☞ page 32)

Volume Adjust

Adjust and store the auto-adjustment volume level for each source. (For

discs, the adjustment is stored for each of the following categories: DVD/

DVD-VR, VCD/CD, and DivX/MPEG1/MPEG2/MP3/WMA/WAV.) The volume

level will automatically increase or decrease when you change the source.

♦ –15 to +06; Initial 00

Amplifier Gain * You can change the maximum volume level of this unit.

♦ High : VOL 00 to 50

♦ Low : VOL 00 to 30

(Select this if the peak power of the speakers is less

than 50 W.)

♦ Off : Deactivates the built-in amplifier

• If you change this setting from <High>/<Off> to <Low> while the

volume level is set higher than the maximum level of <Low>, the unit

automatically lowers the volume level to “VOL 30”).

* You can change the setting only when the AV source is turned off.

EN_KW-AVX746EU.indb 38EN_KW-AVX746EU.indb 38 11/01/16 16:5711/01/16 16:57

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 196 197

No comments

Jvc KW-AVX746 User Manual Page 38