Jvc KD-R811 User Manual Page 28

  • Download
  • Add to my manuals
  • Print
  • Page
    / 91
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 27
28 ENGLISH
Category
Menu item Selectable setting, [ Initial: Underlined ]
Color Setup
Ring Color *
2
On
Off
: When a call comes in, the display will flash in blue.
The display will change to the original color
when the call is answered or the incoming call
stops.
When the unit receives a text message, the
display only illuminate in blue.
: Cancels.
Audio
Fad/Bal *
3,
*
4
Fader/balance
R6 – F6, [ 0 ]
L6 – R6, [ 0 ]
: Fad (fader): Press
5
/
to adjust the front and
rear speaker output balance.
: Bal (balance): Press
4
/
¢
to adjust
the left and right speaker output balance.
Loud
Loudness
Loud 1/2/3
Off
: Boost low and high frequencies to produce a
well-balanced sound at a low volume level.
: Cancels.
Volume Adjust Level –5 —
Level +5,
[ Level 0 ]
: Preset the volume adjustment level of each source
(except FM), compared to the FM volume level.
The volume level will automatically increase or
decrease when you change the source.
Before making an adjustment, select the source
you want to adjust.
“FIX” appears on the display if “FM” is selected as
the source.
Subwoofer LPF
Level
Phase
: Turn the control dial to select the cutoff
frequency to the subwoofer.
Off: All signals are sent to the subwoofer.
LPF 55Hz/LPF 85Hz/LPF 120Hz: Frequencies
higher than 55 Hz/85 Hz/120 Hz are cut off.
: Turn the control dial to adjust the subwoofer
output level. Level 00 to Level 08 [ Level 04 ]
: Turn the control dial to select the subwoofer
phase. 0deg (normal) or 180deg (reverse)
HPF
High Pass Filter
Select the cutoff frequency to the front/rear speakers. Set this to
match the LPF settings.
62Hz/95Hz/
135Hz
Off
: Frequencies lower than 62 Hz/95 Hz/135 Hz are
cut off.
: All signals are sent to the front/rear speakers.
*
2
Displayed only when USB Bluetooth adapter, KS-UBT1 is connected.
*
3
If you are using a two-speaker system, set the fader level to <0>.
*
4
This adjustment will not affect the subwoofer output.
EN28-37_KD-R811_003A_f.indd 28EN28-37_KD-R811_003A_f.indd 28 1/20/10 3:07:35 PM1/20/10 3:07:35 PM
Page view 27
1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 90 91

Comments to this Manuals

No comments