Jvc SR-VS30E User Manual download pdf (Page 39)

Masterpage:Right-NoTitle0

Filename [SR-VS30EK_2-EN.fm]

Page 39 January 25, 2002 6:29 pm

Enter the programme date.

Press

DATE+/–

● The current date appears on the TV screen. The date you enter

appears in its place.

Enter the channel position.

Set the tape speed.

Press

SP/LP

(

Set the PDC mode.

Press

PDC

to select “ON” or “OFF”.

● If “VPS/PDC ON” is displayed on the TV screen or “VPS/PDC”

is lit on the front display panel, PDC is set to ON.

● If “VPS/PDC OFF” is displayed on the TV screen or “VPS/PDC”

is not lit on the front display panel, PDC is set to OFF.

墌

“PDC Recording” in the right column

● VPS (Video Programme System) recording is not currently

available in the U.K. and not possible with this recorder.

Return to the normal screen.

Press

PROG

. “PROGRAM COMPLETED” appears

on the TV screen for about 5 seconds, then the normal

screen appears. If “PROGRAM OVERLAPPED” appears

on the TV screen and “Err” on the front display panel, see

page 43.

● Repeat steps

–

for each additional programme.

Engage the recorder’s timer mode.

Press

(

TIMER

). The recorder turns off automatically and

“

” appears on the front display panel.

● To disengage the timer mode, press #

(

TIMER

) again.

To Timer-Record Weekly Or Daily Serials . . .

...anytime during steps

through

, press

WEEKLY

(

number

key

“

”) for weekly serials or

DAILY

(

number key

“

”) for daily

serials (Monday – Friday). Either “WEEKLY” or “DAILY” appears

on the TV screen. Pressing the button again makes the

corresponding indication disappear.

NOTES:

●

You can programme each deck to timer-record as many as 6

programmes. If you try to programme the recorder to record a

seventh, “PROGRAM FULL” appears on the TV screen and

“FULL” appears on the front display panel. To record the extra

programme, you must first cancel any unnecessary

programmes (

墌

pg. 42).

●

It is not possible to timer-record a satellite broadcast received

on the channel position “0” by the satellite receiver.

●

It is not possible to timer-record the same programme on both

the VHS deck and the DV deck simultaneously.

●

During timer recording, it is not possible to change the

recording deck (VHS or DV).

●

If the times that are programmed for recording on the DV deck

and on the VHS deck overlap, the earlier start time takes

precedence. If the start times are the same, the VHS deck

takes precedence.

Press

PR+/–

● If you want to set a satellite

programme, press the

number

key “0”

to change “TV PROG”

to “SAT”, then press

PR+/–

Satellite Receiver Users

To timer-record a satellite broadcast using Express Timer

Programming:

A Perform “Satellite Receiver Control Setting” on page 17.

B Perform steps

–

. In step

, press the

number key

“

”

to change “TV PROG” to “SAT”. The front display panel

shows “L2” for the channel position. Then press

PR+/–

enter the channel position for the satellite broadcast. In

step

, you cannot set “PDC” to “ON”.

C Leave the satellite receiver’s power on.

PDC Recording

Now available from some TV stations, PDC (Programme

Delivery Control) is a service designed to assure safe,

accurate timer recording. With this system, special code

signals are transmitted together with the audio/video signals.

These code signals control your video recorder and have

precedence over the advertised times which you may have

preset into the timer. This means that your recorder will start

and stop recording when the preset TV programmes actually

start and end — even if the broadcast time of a preset TV

programme is changed from what has been advertised. PDC

is currently available nationally on BBC1, BBC2, Ch.4 and

Ch.5, except from a few small relay transmitters. Ch.3

operates a PDC service in some areas. All channels intend to

offer this service in due course. Check your TV programme

listing guide for latest information. If the channel you intend

to record does not offer a PDC service your recorder will not

start recording if PDC has been selected. Be sure to set PDC

to “OFF” if PDC is not available on your selected channel.

(See step

on page 37 and step

in the left column.

NOTES:

●

Set the start time (PDC time) exactly as advertised in the

TV listing. A different time than advertised will result in no

recording.

●

PDC recording is also possible when a satellite receiver or a

cable system is connected to AV2 (L-2) IN/DECODER on

your recorder.

●

PDC recording is also possible via the AV1 (L-1) IN/OUT

connector.

SR-VS30EK_1.book Page 39 Friday, February 1, 2002 1:50 PM

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 91 92

Comments to this Manuals

No comments

Jvc SR-VS30E User Manual Page 39

Comments to this Manuals

Related products and manuals for Camcorders Jvc SR-VS30E