Jvc SR-VS30E User Manual download pdf (Page 13)

Masterpage:Right

Filename [SR-VS30EK_1a-EN.fm]

Page 13 February 1, 2002 1:49 pm

INITIAL SETTINGS

Auto Set Up

Auto Channel Set/Auto Clock Set/

Auto Guide Program Number Set

Turn on the recorder.

Press

on the recorder or remote control.

Perform Auto Set Up.

The AUTO SET/T-V LINK display appears on the front

display panel and/or on the TV screen.

On the front display panel

Press

to select “Auto” and press

● When you have connected the video recorder to a TV offering

T-V Link via a fully-wired 21-pin SCART cable (

墌

pg. 11) and

the TV is turned on, the recorder automatically performs the

Preset Download (

墌

pg. 14) even if you select “Auto” for

Auto Set Up function.

NOTES:

●

In the area where no TV station transmits a PDC (Programme

Delivery Control) signal, the recorder can perform neither

Auto Clock Set nor Auto Guide Program Number Set.

●

If there is a power cut, or if you press

while Auto

Set Up is in progress, Auto Set Up will be interrupted; be sure

to turn off the recorder power once and try again from step

●

Auto Clock Set may not function properly depending on the

reception condition.

After the

button on the recorder or remote control is

pressed for the first time to power on the recorder

, the Auto

Set Up function sets the tuner channels, clock and Guide

Program numbers automatically.

ATTENTION

Once you have performed Auto Set Up, even if the recorder’s

memory backup has expired, all the stored stations and their

Guide Program numbers remain in the recorder’s memory

and the recorder will not perform Auto Set Up again. You

only need to set the clock. (

墌

pg. 80)

If you have moved to a different area, perform each setting as

required.

● Tuner setting

墌

pg. 72

● Clock setting

墌

pg. 80

If a new station starts broadcasting in your area, perform

tuner setting (

墌

pg. 72).

123

456

789

Before starting, make sure of the following:

● The TV aerial cable should be connected to the recorder.

● The recorder’s mains power cord should be connected to a

mains outlet.

● If you want to use the on-screen display, the TV should be

set to its AV mode.

On the on-screen display

Press

to move the

highlight bar (pointer) to

“AUTO SET” and press

“Auto” blinks on the front display panel; do NOT press

any button on the recorder or remote control until the

front display panel shows clock time, “(CH) 1” or

“– –:– –” as illustrated on page 15.

● If you are using the on-screen

display, the AUTO SET

screen will appear. As Auto

Set Up progresses, the “

”

mark on the TV screen

moves from left to right.

When the Auto Set Up is

completed, “SCAN

COMPLETED” appears for

about 5 seconds, then the

normal screen appears.

Beginning End

SR-VS30EK_1.book Page 13 Friday, February 1, 2002 1:50 PM

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 91 92

Comments to this Manuals

No comments

Jvc SR-VS30E User Manual Page 13

Comments to this Manuals

Related products and manuals for Camcorders Jvc SR-VS30E