JVC RX-F10S User Manual download pdf (Page 13)

Getting started

DIGITAL IN

2(DBS)3(VCR) 1(DVR/DVD)

NOTES

• When shipped from the factory, the DIGITAL IN terminals have

been set for use with the following components:

– 1(DVR/DVD): For DVD recorder or DVD player

– 2(DBS): For DBS tuner

– 3(VCR): For VCR

If you connect other components, change the digital input

(DIGITAL IN) terminal setting correctly. See “Setting the digital

input (DIGITAL IN) terminals—DIGITAL IN1/2/3” on page 21.

• Select the correct digital input mode. See “Selecting the analog

or digital input mode” on page 12.

• When you want to operate the connected component (except

DBS tuner) using the AV COMPU LINK remote control system

(see pages 32 and 33), connect them also as described on

pages 7 to 10.

Digital connection

This receiver is equipped with three DIGITAL IN terminals—one

digital coaxial terminal and two digital optical terminals—and one

DIGITAL OUT terminal.

To reproduce the digital sound, use the digital connection in

addition to the analog connection methods described on pages 7

to 10.

Digital coaxial cable (supplied: 1 cable)

Digital optical cable (not supplied)

Turn off all components before making connections.

• When you connect other components, refer also to their

manuals.

7 Digital input terminals

When the component has a digital coaxial output

terminal, connect it to the 1(DVR/DVD) terminal,

using a digital coaxial cable (supplied).

When the component has a digital optical output

terminal, connect it to the 2(DBS) or 3(VCR)

terminal, using a digital optical cable (not supplied).

Before connecting a digital

optical cable, unplug the

protective plug.

NOTE

The digital signal format transmitted through the DIGITAL OUT

terminal is the same as that of the input signal. For example,

when the DTS signals are input, the DTS signals are transmitted.

Connecting the power cord

When all the audio/video connections have been made, connect

the AC power plug to the wall outlet. Make sure that the plugs are

inserted firmly. The standby lamp lights in red.

CAUTIONS:

• Do not touch the power cord with wet hands.

• Do not alter, twist or pull the power cord, or put anything heavy

on it, which may cause fire, electric shock, or other accidents.

• If the cord is damaged, consult a dealer and have the power

cord replaced with a new one.

NOTES

•Keep the power cord away from the connecting cables and the

antenna. The power cord may cause noise or screen

interference.

• The preset settings such as preset channels and sound

adjustment may be erased in a few days in the following cases:

– When you unplug the power cord.

– When a power failure occurs.

7 Digital output terminal

You can connect any digital componens which have an optical

digital input terminal.

Connecting digital recording equipment to the

DIGITAL OUT terminal enables you to perform

digital-to-digital recording.

PCM/STREAM

DIGITAL OUT

06-11RX-F10S[J]_f.p65 04.4.22, 15:2511

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 87 88

Comments to this Manuals

No comments

JVC RX-F10S User Manual Page 13

Comments to this Manuals

Related products and manuals for AV receivers JVC RX-F10S