Jvc UX-P450 User Manual download pdf (Page 108)

English

To connect the AM loop antenna

• If the AM loop antenna wire or speaker cords are covered

with vinyl, remove the vinyl to expose the tip of the

antenna by twisting the vinyl.

• Make sure the antenna conductors do not touch any other

terminals, connecting cords and power cord. Also, keep the

antennas away from metallic parts of the System,

connecting cords, and the AC power cord. This could cause

poor reception.

To connect the speaker cords

Connect the right speaker to the RIGHT terminals, and the

left speaker to the LEFT terminals.

• When connecting the speaker cords, match the polarity of

the speaker terminals: Red cord to (+) and black cord

to (–).

AV COMPU LINK remote control system

This system allows you to use JVC’s TV with simple

operations; by starting playing back a disc, the TV

automatically turns on and changes the input mode to the

appropriate position so that you can view the playback

picture.

• To use AV COMPU LINK, you need to connect the

System and the TV by using a cord with monaural mini-

plugs (not supplied) in addition to the video input/output

connection through the COMPONENT jacks, S-VIDEO

jack or VIDEO (composite) jack on the rear.

Setting the Video Output Selector

You can select the video output to match it to the color

system of your TV.

Changing the Scanning Mode

This System supports progressive scanning.

If you connect a progressive TV through the COMPONENT

jacks, you can enjoy a high quality picture from the built-in

DVD player by selecting “PROGRE.”

• DO NOT connect more than one speaker to

each terminal.

• DO NOT allow the conductor of the speaker

cords to be in touch with the metallic parts of

the System.

1 Hold

2 Insert

3 Release

1 Hold

2 Insert

3 Release

IMPORTANT

The speakers are magnetically shielded to avoid color

distortions on TVs. However, if not installed properly, it

may cause color distortions. So, pay attention to the

following when installing the speakers.

• When placing the speakers near a TV set, turn off the

TV’s main power switch or unplug it before installing the

speakers. Then wait at least 30 minutes before turning on

the TV’s main power switch again.

Some TVs may still be affected even though you have

followed the above. If this happens, move the speakers

away from the TV.

NTSC:

For an NTSC TV.

PAL:

For a PAL TV.

• When using a multi-color system

TV, either position will work.

PROGRE

Progressive scanning. For a progressive TV.

INTER

Interlaced scanning. For a conventional TV.

VIDEO

OUT

SELECT

PAL

NTSC

Remote

ONLY

PROGRESSIVE

PROGRE

INTER

(at the same time)

Connection.fm Page 6 Monday, May 24, 2004 4:28 PM

1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 197 198

Comments to this Manuals

No comments

Jvc UX-P450 User Manual Page 108

Comments to this Manuals

Related products and manuals for Acoustics Jvc UX-P450