Jvc SR-V10U User Manual download pdf (Page 29)

PROGRAM 1

(PLUSCODE NO. 12345678)

START STOP

8:00PM = 10:00PM

DATE CH

12/24/00 12 SP

SUN

PRESS (8=DAILY, 9=WEEKLY

STOP+/– = STOP TIME, SP/EP)

PRESS (PROG.) TO END

Input receiving channel number

The guide channel

number, which is

assigned to the TV or

cable station for the

PlusCode number that

you entered in step 3,

will appear

automatically on the

Guide Channel Set screen.

Press the Number keys (or CH +/– or SHUTTLE

PLUS %ﬁ) to input the number of the channel on

which the broadcast for the PlusCode number is

received on the VCR, then press OK.

● The Guide Channel Set screen appears only

when you input the PlusCode number of a

station for which the guide channel number has

not been set previously.

● If you receive your channels through a cable

box, select the cable box output channel — the

channel on which you view the cable box

programs on the TV.

Check program date

The PlusCode number you entered and the

corresponding timer

recording program is

displayed on the

Program screen. Check

to make sure it is

accurate.

● To change the stop

time, press STOP +/–.

● To timer-record daily (Sunday–Saturday) or

weekly serials, press DAILY (number “8”) or

WEEKLY (number “9”). “DAILY” or “WEEKLY”

appears on the Program screen.

Pressing the button again makes each

corresponding display disappear.

● If you made a mistake, press CANCEL to access

the PlusCode No. screen again and input the

correct PlusCode number.

● If an incorrect PlusCode number or the one for

a broadcast already finished has been inputted,

“ERROR” is displayed for about 5 seconds, then

the PlusCode No. screen reappears.

Set tape speed

Press SP/EP.

IMPORTANT

If you have moved to a different area or if a broadcasting

station’s channel number has been changed, the wrong

VCR CH number will be displayed on the Program screen

in step 5. When this happens, set the correct guide

channel number for that station. (Z pg. 30, “Changing

VCR Plus+ Setting”)

NOTES:

●

In case of a power failure after programming, the recorder's

memory backup keeps your selections (if the lithium battery is

not exhausted).

●

To timer-record cable channels received through a cable box,

be sure to keep the cable box turned on with the correct

channel selected.

GUIDE CHANNEL SET

GUIDE CH: 12

VCR CH : –– –

PRESS NUMBER KEY (0–9)

OR (5,∞), THEN (OK)

PRESS (PROG.) TO END

Return to normal screen

Press PROG. or OK.

“PROGRAM COMPLETED” appears on the

screen for about 5 seconds, then normal screen

appears.

• If “PROGRAM NOT COMPLETED PROGRAM

OVERLAP” appears, you have another program

overlapping the program you have just made.

The Program Check screen appears and

conflicting programs will start blinking.

You can now correct the conflicting programs.

See “When programs overlap each other” on

page 36.

Engage timer recording standby mode

Press TIMER.

The VCR turns off automatically and “‰” is

displayed on the front display panel.

To use the VCR while it is in timer recording standby

mode

Press TIMER to cancel the timer recording standby

mode, then press POWER to turn on the VCR.

DO NOT forget to put the VCR into timer recording standby

mode again by pressing TIMER after you use the VCR;

otherwise, you cannot record the broadcasts you want.

● When “AUTO TIMER” is set to “ON” (Z pg. 37, 38) ,

the timer recording standby mode is automatically

engaged when the VCR is turned off. It is temporarily

canceled when the VCR is turned on. You do not have to

press TIMER to engage or disengage the timer recording

standby mode.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 63 64

Comments to this Manuals

No comments

Jvc SR-V10U User Manual Page 29

Comments to this Manuals

Related products and manuals for Acoustics Jvc SR-V10U