Jvc CA-HXZ1 User Manual download pdf (Page 25)

– 22 –

Recording

Recording on a Tape

Press 0 EJECT to insert a recordable cassette

with the exposed part of the tape down.

Close the cassette holder gently.

• If you want to record on both sides of a tape, see “To

record on both sides—Reverse Mode.”

Check the tape direction of the cassette deck.

• If the tape direction is not correct, press TAPE 2 3 twice

then 7 to change the tape direction.

Start playing the source—FM, AM, CD player,

or auxiliary equipment connected to AUX jacks.

• When the source is CD, you can also use CD Direct

Recording—(see page 23), and Auto Edit Recording—

(see page 24).

Start recording.

On the unit:

Press REC START/STOP.

On the remote control:

Press and hold REC START/STOP

for more than 1 second.

The REC (recording) lamp flashes when recording starts and

the tape direction indicator (3 or 2) starts flashing slowly.

• If no cassette is inserted, “NO TAPE” appears on the

display. If a protected tape is inserted, “NO REC”

appears on the display.

To stop recording immediately, press REC START/STOP or 7

(or press and hold REC START/STOP on the remote control

for more than 1 second).

To remove the cassette, press 0 EJECT to open the cassette

holder.

To record on both sides—Reverse Mode

On the unit ONLY:

Press REVERSE MODE so that the Reverse Mode

indicator on the display lights up like— .

• When using the Reverse Mode for recording,

start recording in the forward (3) direction first.

Otherwise, recording will stop when recording is

done only on one side (reverse) of the tape.

To cancel Reverse Mode, press the button again so that the

Reverse Mode indicator on the display lights up like— .

IMPORTANT:

• It should be noted that it may be unlawful to re-record

pre-recorded tapes, records, or discs without the

consent of the owner of copyright in the sound or video

recording, broadcast or cable programme and in any

literary, dramatic, musical, or artistic embodied

therein.

• The recording level is automatically set correctly, so it is

not affected by the VOLUME, the SUBWOOFER LEVEL,

and the SOUND MODE controls. Thus, during recording

you can adjust the sound you are actually listening to

without affecting the recording level.

• If there are excessive noise or static in the recording you

have made, the unit may be too close to a TV. Increase the

distance between the TV and the unit.

• You can use type I tape for recording.

To protect your recording

Cassettes have two small tabs

on the back to protect from

unexpected erasure or re-

recording.

To protect your recording,

remove these tabs.

To re-record on a protected tape, cover the holes with

adhesive tape.

To keep the best recording and playback sound

quality

If the heads, capstans, and pinch rollers of the cassette deck

become dirty, the following will occur:

• Impaired sound quality

• Discontinuous sound

• Fading

• Incomplete erasure

• Difficulty in recording

To clean the heads, capstans, and pinch rollers

Use a cotton swab moistened with alcohol.

To demagnetize the heads

Turn off the unit, and use a head demagnetizer (available at

electronics and audio shops).

Heads

Capstans

Pinch rollers

REC START

/ STOP

REVERSE

MODE

Continued

EN22-28.CA-HXZ1R_HXZ1[B_A]f.pm6 3/21/02, 2:46 PM22

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 72 73

Comments to this Manuals

No comments

Jvc CA-HXZ1 User Manual Page 25

Comments to this Manuals

Related products and manuals for Acoustics Jvc CA-HXZ1