Jvc WB-1550 User Manual

DEUTSCHFRANÇAISESPAÑOLITALIANO ENGLISHINSTRUCTIONSOUTDOOR HOUSINGLST0267-001AWB-1540WB-1550For Customer Use:Enter below the Serial No. which is locate

10Installation and Connection (WB-1550)1. Dismantle the gasket and gasket glandLoosen the 8 Screws B (M4) using a driver, followed by dismantling the

111. Connect the AC 24 V output cable to the cameraConnect the AC 24 V output cable to the ceiling mount of the camera to be installed.2. Connect othe

12Installation and Connection (WB-1550)1. Dismantle the camera mounting bracketLoosen the screws on the camera mounting bracket (M4, 4 pcs) using a dr

131. Mount the desiccantUse a tape to adhere the supplied desiccant to the interior of the lower housing.2. Mount the lower housingMount the lower hou

14Installation and Connection (WB-1550)4. Open the cable connection coverUse provided hexagon wrench to remove the 4 screws (M3 x 12) from the cable c

15Others䡵 GeneralPower / Voltage : AC 24 V 50 Hz/60 Hz (Main Housing Unit)Power Consumption: 25 W (During heater operation, excluding camera)Installat

© 2005 Victor Company of Japan, LimitedPrinted in JapanLST0267-001AWB-1540/WB-1550 OUTDOOR HOUSINGWB-1540_1550_04 Cov4.fm Page 1 Monday, August 29,

2These are general IMPORTANT SAFEGUARDS and certain items may not apply to all appliances.IMPORTANT SAFEGUARDS1. Read all of these instructions.2. Sav

3Information for Users on Disposal of Old Equipment[European Union]This symbol indicates that the electrical and electronic equipment should not be di

4Getting StartedThank you for purchasing this product. (These instructions are for WB-1540U/ WB-1550U)Before beginning to operate this unit, please re

5 System ExampleVN-C625 and VN-C655 SystemsCAUTION:T1: Not in use on this system. Ensure to bind both ends of cables that are not in use with insulat

6Installation and Connection (WB-1540)1. Dismantle the gasket and gasket glandLoosen the 6 Screws B (M4) using a driver, followed by dismantling the g

71. Dismantle the camera mounting bracketLoosen the screws on the camera mounting bracket (M4, 4 pcs) using a driver to dismantle it.2. Dismantle the

8Installation and Connection (WB-1540)1. Adhering the desiccantUse a tape to adhere the supplied desiccant to the interior of the lower housing.2. Mou

94. Open the cable connection coverUse provided hexagon wrench to remove the 4 screws (M3 x 12) from the cable connection cover to open it.5. Connect