Plane
Thank you for buying this JVC LCD panel television.
To make sure you understand how to use your new TV, please read this manual thoroughly before you begin.
Follow this manual regarding setup!•
Connect only to a 110-240 V, 50/60Hz AC outlet. -
Make enough room for inserting and removing the power •
plug!
Place the TV as close to the outlet as possible!•
The main power supply for this TV is controlled by inserting or removing -
the power plug.
Never cut or damage the power cord!•
If the AC plug is not the right shape, or the power cord is not long -
enough, use an appropriate plug adapter or extension cable. (Consult
your retailer)
Unplug the power cord when going out!•
The power buttons on the remote control and the TV unit cannot -
completely turn off the TV. (Make appropriate arrangements for
bedridden people.)
Do not allow the TV to fall!•
Do not rest your elbows on, or allow children to hang from the TV. -
There is a risk that the TV will fall and cause injuries. -
Make use of the hole on the back of the stand to prevent -
the TV from falling easily.
If the TV is damaged or behaving strangely, stop •
using it at once!
Unplug the power cord and contact your retailer. -
Never place anything on the TV!•
Placing liquid, naked ames, cloths, paper, etc. on the TV may cause a -
re.
Never expose to rain or moisture!•
To prevent re or electric shock, never allow -
liquids to enter the unit.
Never insert objects into the cabinet •
openings!
It may cause a fatal electric shock. -
Take care when children are near. -
Hold the TV so as not to scratch the •
screen!
Do not touch the screen when carrying the TV. -
Do not carry the TV on your own!•
In order to prevent accidents, ensure that the TV -
is carried by two or more people.
For more details on installation, usage and safety • ➔ Consult
your retailer.
Never insert the power cord by wet hand!•
It may cause a fatal electric shock. -
Keep the TV set away from direct sunlight!•
TV set can be damaged. -
Place the TV set in a neat and dry place. Do not place the •
product close to source of steam, heat, moisture or oil.
Becauseitmaycausearehazardorelectricshockhazard!
Don’t touch an external metal part of the TV set!•
It may cause an electrocuted. -
For keep a distance from potential ignition •
sources to the components or part in side TV
set, customer should install TV set with a stand
within ± 10 perpendicularly degree.
Never dismantle the rear panel!•
It may cause an electric shock. -
Never obstruct the ventilation holes!•
It may cause overheating or a re. -
Handle LCD panel with care!•
Use a soft, dry cloth when cleaning. -
Never try repair the TV yourself!•
If the problem cannot be solved in “Troubleshooting” unplug the power -
cord and contact your retailer.
Ifatelevisionisnotpositionedinasufcientlystable•
location,itcanbepotentiallyhazardousduetofalling.Many
injuries, particularly to children, can be avoided by taking
simple precautions such as:
Using cabinets or stands recommended by the manufacturer of the -
television.
Only using furniture that can safely support the television. -
Ensuring the television is not overhanging the edge of the supporting -
furniture.
Not placing the television on tall furniture (for example, cupboards or -
bookcases) without anchoring both the furniture and the television to a
suitable support.
Not standing the television on cloth or other materials placed between -
the television and supporting furniture.
Educating children about the dangers of climbing on furniture to reach -
the television or its controls.
Topreventaccidents,rmlyattachtheTVstandstotheTV•
shelf before using microphone.
Make sure that the subwoofer is in good condition before •
installing it on the TV.
If the subwoofer has leakage current, it may damage the TV or cause -
electric shock.
Power requirements ■
Connect the power cord •
only to a 110-240V, 50/60Hz
AC outlet.
Installation requirements ■
To avoid overheating, •
ensure the unit has ample
room.
To prevent the TV from falling thread the •
belt through the hole on the back of the
stand and secure it to the TV rack.
If the microphone is installed, •
should be lock it’s cable follow
picture.
* Please see how to set up the TV and connection in GGT0356-001A-H.
Hole for belt
Belt
(not provided)
Screw (not provided)
GGT0364-001A-H
0710GLT-NF-MT
© 2010 Victor Company of Japan, Limited
WIDE LCD PANEL TV INSTRUCTIONS
LT-32A1
ENGLISH
200 mm
50 mm150 mm 150 mm 50 mm
2 / 3 Select Main menu.
(Picture / Sound / Features / Set Up)
5 / ∞ Select sub menu.
2 / 3 Change setting.
When 3 is shown.
3 Display function setting.
5 / ∞ Select function.
2 / 3 Change setting.
.
Return : Return to the previously viewed channel.
Favorite channel setting.
1. Register the favorite channel
Press and hold
Programmed!
will be displayed.
Press
If the favorite channel has not been registered then “ No memory “ will •
be displayed.
Press number
button (1-4 only)
Press number
button (1-4 only)
2. Recall the favorite channel
Move the picture with 3 or 4
while this bar is displayed.
When 720p or 1080i or 1080p signal •
is received, “Full” and “Slim” can be
selected.
In PC mode, “Regular” and “Full” can •
be selected.
Insert the batteries•
Use two “AAA/R03” dry cell batteries.
Insert the batteries from the · end,
making sure the · and ª polarities
are correct.
“AAA/R03”
Batteries
WARNING:
Batteries shall not be exposed
to excessive heat such as direct
sunshine, re or the like.
WARNING:
To prevent the spread of re, keep candles or other open ames away from
this product at all times.
If this symbol is shown,
it is only valid in the
European Union.
Remote control buttons and functions
Initial Settings (continued)
Initial Settings
Display MENU.
Show only when powering on for the rst time.•
The power on the unit can also be used.•
Area-1 : Asia, Middle East, Europe, Oceania, Africa
Area-2 : South America, Philippines
1. Select
2. Set
• The select the new Country Area after Initial Setting has completed.
(While the cursor is pointing to Picture menu
and hold for 3 seconds.)
If you select Country Area to “Area-1” If you select Country Area to “Area-2”
Using the TV’s Menu ---> Area - 1
If you want to set undesired channels •
to be skipped, follow Channel Summary
function in Set Up menu.
1. Select
2. Set
V-Scroll
3
1
Power On / Off
2
Color buttons
3
Turn on “Clear SD”
4
Turn on “Zoom”
5
Turn on “Eco Mode”
6
Turn on “Karaoke”
7
Favourite channel setting
8
Display on-screen menu
9
Operate the menu
!
To previous screen
"
Turn on “Sound Meister”
#
Volume control / Turn off muting
[
For button side front will be displayed on-screen menu
When press and hold the button for 3 seconds, •
on-screen menu will be displayed.
To exit, press and hold the button again for •
3 seconds. ]
$
Function for viewing Teletext
%
To Teletext
&
Change channel / Page / Hyper Scan
(
Channel information
)
Switch between TV / Video input
~
Return Plus / Return function
+
Change channel / page
,
Turn the volume off / on
Zoom : Change the aspect ratio
Adjust Volume
Microphone
Favourite 1-4 ? Set 1-4 ?
2
Select a language.
1
Turn on the TV.
3
Select Country Area.
4
Select the teletext language group.
4
Select Air or Cable.
5
Automatically register channels (Auto Program).
5
Searching for the channels (Auto Program)
6
Check what was registered.
6
Check what was registered.
Set Up
Auto Program Automatically registers channels.
Edit / Manual Move
Move a channel position by 2 and Adjust
by 3 / 4.
ID
Edit a channel name by
(Red)
.
Insert
Insert a channel by
(Green)
.
Select a CH/CC by 3 / 4.
Enter number by 0-9 buttons.
Delete
Delete a channel by
(Yellow)
.
Manual
Register a new channel by
(Blue)
.
Beginning channel search by
(Red)
and
(Green)
.
Channel ne tunning by
(Yellow)
and
(Blue)
.
If the picture or sound is unnatural by
for select a system.
Language Select your desired on screen display language.
Video-2 Setting
Switch between video and component signal.
(Video / Component)
Rocket Start TV can turn on quickly. (Off / On)
When Rocket Start is On, power consumption at •
standby mode will more than normal standby mode.
Teletext
Language
Select Teletext language group.
(Group-1 / Group-2 / Group-3 / Group-4 / Group-5)
HDMI Setting Setting for HDMI input. (Size / Audio)
PC Setting
Setting for PC input. (Auto / PC Position / Phase / Pixel)
Features
On Timer Turns on the TV from standby mode.
PR Select a channel. (01 - 99)
On Timer Set a time. (00:00 - 12:00)
Sleep Timer
Turns off the TV to standby mode. (Off / 10 / 20 / ...120)
Channel Guard
Stop children from watching specic channels.
Blue Back Display a blue screen and mute the sound when the
signal is weak or absent. (Off / On)
Child Lock Disables the side control buttons of the TV. (Off / On)
Auto Shutoff Set the power to turn off if no TV signal (RF) is
received and no operation is performed for about 15
minutes. (Off / On)
Favourite Setting
Delete the favorite channel that you registered by
(Blue)
.
Power Lamp Sets power lamp lighting while the TV is on. (Off / On)
Eco Mode Adjust picture contrast to match your room brightness.
(Off / Eco-1 / Eco-2 / Max-Eco)
21
Picture
Picture Mode
Select the picture as you like. (Standard / Soft / Bright)
Backlight Darker <--> Brighter
Contrast Lower <--> Higher
Brightness Darker <--> Brighter
Sharpness Softer <--> Sharper
Colour Lighter <--> Deeper
Tint Reddish <--> Greenish *Only NTSC
White Balance
Select the white balance of the picture. (Cool / Mid / Warm)
Features Finer picture adjustment
Clear SD
For clearly picture (Off / Mode-1 / Mode-2)
Digital VNR Reduces the amount of noise in original
picture. (Off / On)
Colour Management
For natural - looking pictures. (Off / On)
Picture Management
Fix bright / dark pictures. (Off / On)
Dynamic Backlight
Reduces the brightness of the backlight
when the screen is dark. (Off / On)
Colour System Select an appropriate colour system.
(Auto / PAL / SECAM / NTSC 3.58 / NTSC
4.43 / PAL-M / PAL-N)
Zoom Change the aspect ratio.
(Auto / Regular / Panoramic /14:9 Zoom /
16:9 Zoom / 16:9 Zoom Subtitle / Full)
Sound
Stereo / I
■
II
Select the stereo, mono or bilingual language.
(I / II / O / m / Mono)
Sound Meister Set sound theme to match your listening source.
(Off / Dynamic / Pure / Living)
Bass Compensates low frequencies to widen the
frequency band. (Weaker <--> Stronger)
Treble
Compensates high frequencies to widen the
frequency band. (Weaker <--> Stronger)
Surround Expands the stereo sound naturally.
(Narrower <--> Wider)
Balance Left Stronger <--> Right Stronger
Voice Enhancer
Uses sound enhancement technology. (Off / On)
Al Volume
Prevent sudden increase or decrease of sound. (Off / On)
Subwoofer Out
Chooses to connect subwoofer. (Off / On)
Subwoofer Level
Adjusts sound level of your subwoofer.
(Lower <--> Louder)
When Subwoofer Out set to On, you can adjust •
Subwoofer Level.
Karaoke
You can enjoy to reduce the vocals for your own karaoke.
Karaoke Chooses to reduce the vocals.
(Off / Mode-1 / Mode-2)
Main Volume Adjusts volume level. (Lower <--> Louder)
Microphone Volume
Adjusts volume level of microphone.
(Lower <--> Louder)
(continued)
> Language
English
Français
Українська
ไทย
Tiếng Việt
Português
Melayu
Pусский
Castellano
Set Up
> Country Area
Area - 1
Area - 2
Set Up
16:9 Zoom
Picture Mode
Backlight
Contrast
Brightness
Sharpness
Colour
Tint
White Balance
Features
Soft
Warm
Picture
> Auto Program
Air
Cable
Set Up
>> Auto Program
CH 40
5%
Set Up
> Channel Summary
CH / CC
CH 02
CH 03
CH 04
CH 05
CH 06
CH 07
CH 08
CH 09
CH 10
CH 11
Skip
Yes
Yes
ID
– – – – – –
– – – – – –
B B C A B C
A B C D E F
– – – – – –
– – – – – –
– – – – – –
– – – – – –
– – – – – –
– – – – – –
Set Up
> Teletext Language
Group-1
Group-2
Group-3
Group-4
Group-5
Set Up
> Auto Program
CH 40
5%
Set Up
Panoramic
Zoom
Auto
Regular
Panoramic
14:9 Zoom
16:9 Zoom
16:9 Zoom Subtitle
Full
Picture
> Edit
PR
01
02
03
04
05
06
07
08
09
10
CH / CC
CH 02
CH 03
CH 47
CH 76
CH 12
CH 09
CH 05
CH 02
CH 15
CH 28
ID
– – – – – –
– – – – – –
B B C A B C
A B C D E F
– – – – – –
– – – – – –
– – – – – –
– – – – – –
– – – – – –
– – – – – –
Set Up
Comments to this Manuals