Jvc Multi-Format SDI Unit IF-C151HDG User Manual download pdf (Page 6)

ENGLISH

To select the audio channel:

Using the MENU control on the monitor, you can select the audio channel output from

the audio output terminal.

Set the group of the audio output modes you want to select on the monitor beforehand.

For more details, refer to the monitor’s manual.

2 SWITCHED OUT terminal (1 line)

Outputs the re-clocked signal.

• The input signal (INPUT C or D) currently selected on the monitor is output from this

terminal.

NOTES:

• When you change the monitor’s input to INPUT A or B, the signal of INPUT C or D selected last

time is output from this terminal.

• The signal is output from this terminal only when the monitor is turned on.

3 HD SDI/SD SDI, EMBEDDED AUDIO signal input terminals (IN C, IN D)

Accepts the following signals:

• SMPTE292M HD SDI signal

• SMPTE259M SD SDI signal

• EMBEDDED AUDIO signals including up to 8 audio channels with the sampling

frequency of 48 kHz.

\ Select the input using the INPUT SELECT button on the monitor.

To Select IN C terminal: Press the INPUT SELECT C button.

To Select IN D terminal: Press the INPUT SELECT D button.

About the AUDIO LEVEL METER function

You can check the conditions of the current EMBEDDED AUDIO signals on the AUDIO

LEVEL METER display.

You can turn on/off the AUDIO LEVEL METER display or change its settings using the

menu on the monitor.

For more details, refer to the monitor’s manual.

NOTE:

The type of signal coming through the IN C and IN D terminals are automatically recognized—HD

SDI or SD SDI signal. Note, however, that input lines are not changed automatically.

EN_LCT1878-001A.p65 05.5.2, 7:43 PM5

1 2 3 4 5 6 7 8

No comments

Jvc Multi-Format SDI Unit IF-C151HDG User Manual Page 6