Jvc Multi-Format SDI Unit IF-C151HDG User Manual Page 2

  • Download
  • Add to my manuals
  • Print
  • Page
    / 8
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 1
1
ENGLISH
IF-C151HDG is only for use with the monitor specified. Consult your dealer about the
monitor which can be used with IF-C151HDG.
Features
Both HD SDI and SD SDI signals can be input through one terminal.
The signal type (HD SDI or SD SDI) coming through the terminal is automatically detected.
Two input lines enables highly general use.
Input lines can be switched by external control—make contact control, trigger pulse control, and RS-
485 control.
AUDIO LEVEL METER enables checking the audio level of the EMBEDDED AUDIO signal input.
Two channels of audio monitor output enables EMBEDDED AUDIO signal to be output as analogue
signal.
Output channels can be switched by using the monitor or an RS-485 control.
Thank you for purchasing this JVC Multi-Format SDI Unit. In order to take full
advantage of the unit’s capabilities, please read and follow all instructions carefully
before installing and using the unit. Retain this booklet for future reference.
Precautions
Before installing this unit in your monitor, please read the Safety
Precautions included in your monitor’s user manual.
FCC NOTICE (U.S.A. only)
CAUTION: Changes or modifications not approved by JVC could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
EMC Supplement (Europe only)
This equipment is in conformity with the provisions and protection requirements of the
corresponding European Directives. This equipment is designed for professional video appliances
and can be used in the following environments:
Controlled EMC environment (for example purpose built broadcasting or recording studio), and
the rural outdoors environment (far away from railways, transmitters, overhead power lines, etc.)
Accessaries
Make sure that the following items are contained:
Input unit (x 1) Cover (x 1)
Wire connector (x 1) Screw (x 8)
EN_LCT1878-001A.p65 05.5.2, 7:43 PM1
Page view 1
1 2 3 4 5 6 7 8

Comments to this Manuals

No comments