JVC XV-FA90BK User Manual download pdf (Page 65)

Initial settings

English

Select the desired speaker(s) to be set using

CURSOR 5/∞.

• F. S P : Front speakers. The level is fixed to 0dB.

• C.SP : Center speaker

• R.SP : Rear speakers

• S.WOOFER: Sub-woofer

The setting range is between –6dB and +6dB in 1dB

steps.

Set the level using CURSOR 2/3.

• For the speaker(s) whose size is set to “None”, the Speaker

level and Delay cannot be set (“—”appears in the setting

field).

• However, when playing back a Dolby Digital disc, LFE

signal is output from SUBWOOFER output even if

S.WOOFER shows “—”, allowing to activate a sub-woofer

connected. In such case, adjust the output level using the

level control on the sub-woofer.

Delay

(available only when selecting EXPERT)

You can adjust the delay

time of each speakers.

Select [DELAY] using CURSOR 5/∞, then

press ENTER.

The color of “DELAY” changes.

Select the desired speaker(s) to be set using

CURSOR 5/∞.

• F. S P : Front speakers. The delay is fixed to 0ms.

• C.SP : Center speaker (selectable from 0 to –5ms

in 1 ms units)

• R.SP : Rear speakers (selectable from 0 ms,

–5ms, –10 ms, and –15 ms)

Set the delay time using CURSOR 2/3.

• Delay of S.WOOFER cannot be set.

Te s t to n e

(available only while setting LEVEL or

DELAY)

You can check the level

setting by monitoring the

test tone.

Select [TEST TONE] using CURSOR 5/∞,

then press ENTER.

The color of “TEST TONE” changes.

Select the desired speaker(s) using CURSOR

5/∞.

• F. S P : Front speakers

• C.SP :Center speaker

• R.SP : Rear speakers

After selecting the Test tone, if you do not move the

cursor, the test tone is output from each speaker

one by one.

In Test tone mode, if you move down from

“R.SP” position, the test tone continues to output

from the rear speakers as long as is any position

other than “F. S P ” and “C.SP”. Similarly, if you move

up from “F. S P ” position, the test tone continues

to output from the front speakers as long as is

any position other than “C.SP” and “R.SP”.

Set the level using CURSOR 2/3 again, if

necessary.

• In Test tone mode, you hear pink noise, which includes all

frequencies in the audible range, from the speakers. This is

not a malfunction.

• The test tone is not output from the SUBWOOFER output.

NOTE

• To exit the speaker level (or delay) setting mode

Move

to [LEVEL] (or [DELAY]) in the on-screen display

and press ENTER until [LEVEL] (or [DELAY]) returns to

its original color.

SPK.SETTING

EXPERT

LEVEL

DELAY

TEST TONE

F. SP

0mS

C. SP

0mS

R. SP

0mS

S.WOOFER

PREFERENCE2PREFERENCE1

PRESS KEY

BASS

NOTE

• To exit the test tone mode

Move to [TEST TONE] in the on-screen display and

press ENTER until [TEST TONE] returns to its original

color.

SPK.SETTING

EXPERT

LEVEL

DELAY

TEST TONE

F. SP

0dB

C. SP

0dB

R. SP

0dB

S.WOOFER

PREFERENCE2PREFERENCE1

PRESS KEY

BASS

! 

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 73 74

Comments to this Manuals

No comments

JVC XV-FA90BK User Manual Page 65

Comments to this Manuals

Related products and manuals for DVD players JVC XV-FA90BK