JVC DLA-G150CLE User Manual download pdf (Page 69)

DLA-G150CLU

DLA-G150CLE

1-69

No.51931

Menu Operations

Getting Information

You can get information on the input signal, accumulated used hours of light-source lamp, etc.

Press the MENU button.

The main menu appears on the screen.

Select “Information” with the cursor button 5

5 or ∞

∞∞

∞.

The “Information” will be displayed in the main menu.

*No submenu can be selected.

Video main menu PC main menu

Input: Shows the terminal name selected by the VIDEO or PC button. (Y/C, VIDEO or COMP, or PC1, PC2 or DVI)

Switcher: This display currently has no meaning. This is reserved for future use. (“CH.0” is usually displayed to

indicate that it is not being used.)

Source: Shows the projected image’s type of video signal. (Video menu mode)

Resolution: Shows the resolution of the video signal being received. (PC menu mode)

It may not be displayed correctly with some input signals.

Frequency H: Shows the horizontal frequency of the video signal being received. (PC menu mode)

Frequency V: Shows the vertical frequency of the video signal being received. (PC menu mode)

Lamp time: Accumulated used hours of the light-source lamp.

Press the MENU button to exit the menu mode.

Image adj.

Setting

Color temp.

Options

Language

Information

Input

Switcher

Source

Lamp time

VIDEO

CH.0

NTSC

123 h

Input

Switcher

Resolution

Frequency H

Frequency V

Lamp time

PC 1

CH.0

1280 1024

79.9

123

kHz

Image adj.

Setting

Color temp.

Options

Language

Information

Menu Operations

ENGLISHDEUTSHFRANÇAISITALIANOESPAÑOL

* Factory set value

Press the EXIT button to return to the previous menu or press the MENU button to

exit the menu mode.

Note

• Refer to “Removing the Trapezoidal Distortion of the Image” on page 35 for more details about adjusting the keystone.

Adjustment item Button Adjustment content

Menu display 2 or 3

Sets whether to clear the menu display automatically or not.

15sec* : Clears the display automatically in about 15 seconds.

ON : Does not automatically clear the menu display.

Line display 2 or 3

Sets whether to show the line display (Y/C, VIDEO, COMP, PC1, PC2 or DVI) on top

right of the screen or not when the VIDEO or PC button is pressed.

5sec* : Shows the line display for about 5 seconds.

OFF : Does not show the line display.

Lamp time display 2 or 3

Displays the lamp use time.

ON* : Displays when the lamp use time reaches 1000 hours when set in the LPC or

LOC mode.

OFF : Does not display when the lamp use time reaches 1000 hours when set in the

LPC or LOC mode.3

Keystone ENTER

Press the ENTER button to enter the keystone submenu.

In the keystone submenu, press 2 or 3 to correct trapezoidal distortion of the

projected image. (–80 ↔ 0* ↔ +128)

To reset the keystone (trapezoidal distortion of the picture image) to the original

setting (factory set value: 0), press the PRESET button when the “Keystone”

submenu appears on the screen.

To exit the keystone submenu, press the EXIT button.

Lamp control ENTER

Press ENTER to enter the lamp control submenu.

Normal*

: Used as a normal lamp.

LPC : Automatically controls the power used by the lamp and increases it in

steps. When this mode is used, the brightness starts at approximately

70%. The decrease in brightness is slower than in “Normal” mode and this

mode is best suited when using the projector continuously for long periods

of time.

* “Lamp replacement” appears on the screen when the lamp use time

exceeds 2000 hours.

LOC : The brightness can be set in seven levels (-6 to 0). Since the brightness

can be set in steps, this is the mode best suited for adjusting multiple

screens. This setting can also be changed while the projector is being

used. To change the setting, choose LOC with the 5/∞ cursors and

choose the level with the 2/3 cursors.

Flip H 2 or 3

Reverses image right-to-left.

OFF* : For the front method.

ON : For upside-down hanging from the ceiling.

Flip V 2 or 3

Inverses image upside-down.

OFF* : For normal setup.

ON : For upside-down hanging from the ceiling.

RS-232C [bps] 2 or 3

Sets the baud rate for transmission.

9600 : 9600 bps

19200* : 19200 bps

Sleep time [min] 2 or 3

Sets the length of sleep time which automatically brings the projector into stand-by

state. You can select one of the sleep times: 15, 30, 60 and 0 (OFF*) minutes.

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 79 80

Comments to this Manuals

No comments

JVC DLA-G150CLE User Manual Page 69

Comments to this Manuals

Related products and manuals for Data projectors JVC DLA-G150CLE