Jvc GZ-MG330 User Manual download pdf (Page 14)

14

Necessary Settings before Use

Charging the Battery Pack

1

Close the LCD monitor to turn off the

camera.

2

Attach the battery pack.

Slide the battery pack down until it locks

in place.

Bottom of the Camera

BATT.

3

Connect the AC adapter.

•

If the provided AC adapter is AP-V14E,

connect the power cord to the AC adapter,

and plug the power cord into an AC outlet.

•

You can also connect the AC adapter using

the Everio dock connector.* ( pg. 9)

* GZ-MG330 model does not include the

Everio dock.

•

The charge lamp blinks to indicate charging

has started.

L

To detach the battery pack

Slide and hold BATT. ( step 2), then

remove the battery pack.

L

To check the remaining battery power

See page 15.

NOTES

•

You can also use the camera with just the

AC adapter.

•

Please do not pull or bend the AC adapter

plug and cable. This may damage the AC

adapter.

Date/Time Setting

1

Open the LCD monitor to turn on the

camera.

2

When [SET DATE/TIME!] appears,

select [YES] within 10 seconds.

SET DATE/TIME!

YES

NO

If you do not select within 10 seconds, the

screen disappears. In such case, press

the POWER button and turn the camera

on again.

3

Set the date and time.

DATE TIME

31 01

11 07

2007

Repeat this step to input the month, day,

year, hour and minute.

4

Touch the OK button to ﬁ nish.

L

To change the date and time

1) Touch the MENU button.

2) Select [BASIC SETTINGS], and then

[CLOCK ADJUST].

3) Set the date and time.

L

To return to the previous screen

Select

@

.

L

To quit the screen

Touch the MENU button.

DC Jack

AC Adapter

To AC Outlet

(110V to 240V)

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 39 40

Comments to this Manuals

No comments