Jvc UX-G1 User Manual download pdf (Page 10)

To connect AM (MW) and FM antennas

Attach the FM antenna to the FM COAXIAL

75 Ω terminal.

Fasten it up in the position which gives you the best

reception, then fix it on the wall, etc.

Connect the supplied AM (MW) loop

antenna to the AM LOOP terminal.

Place the antenna away from the unit and adjust its

position for the best reception.

For better reception of both FM and AM (MW)

• Make sure the antenna conductors do not touch any other

terminals or connecting cords.

•Keep the antennas away from metallic parts of the unit,

connecting cords, and the AC power cord.

LOOP

FM 75 Ω

COAXIAL

AM (MW) loop antenna

(supplied)

IMPORTANT:

Be sure to check that all connections have been made

before plugging in the power cord.

FM antenna

NOW you are ready to plug in the unit.

About the supplied FM antenna

The FM antenna supplied with this unit can be used as temporary

measure. If reception is poor, you can connect an outdoor FM

antenna.

To connect an outdoor FM antenna

Before connecting the antenna, disconnect the supplied FM

antenna.

Outdoor FM antenna

(not supplied)

A 75 Ω antenna with coaxial type connector

(IEC or DIN 45325) should be used.

Coaxial cable (not supplied)

LOOP

FM 75 Ω

COAXIAL

UX-G1[B]_rev_04connect_f.p65 05.1.28, 11:28 AM7

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 27 28

No comments

Jvc UX-G1 User Manual Page 10