Jvc BR-HD50 User Manual download pdf (Page 64)

E-60

TIME CODE

Recording the time code

Time codes can be recorded with the following ways. Whether to record user’s bit can be selected with

U-BIT in the TC/UB/CLOCK [2/2] Menu screen. (Only for E model)

z Record it from preset data.

z Record it following the one last recorded on the tape.

z Record the time code, which is input to the IEEE1394 terminal.

Record preset time code data to the internal time code generator in the TIME CODE Preset screen.

 Set the TC/UB/CLOCK [1/2] Menu as follows.

TCG SELECT :PRESET

The time code advance mode is REC-RUN mode.

NDF/DF [60] : NON DROP or DROP (U model only)

1. Check the preset time code.

1 Set the COUNTER switch to TC or UB.

2 In the STOP mode, hold down the REC button.

 The preset time code or the user’s bit is displayed on the

monitor. The counter mode is displayed as TCG or UBG.

3 When the REC button is released, it returns to the origi-

nal display.

2. Record.

Press the PLAY button while holding down the REC button.

 The time code and user’s bit are recorded.

To stop recording, press the STOP button.

Recording from preset data

Setting

Operation

Preset time code

Stopping the power supply to the DV IN terminal of BR-HD50 can-

cels the preset value of the time code generator.

KCABEGAP

EGAPTXEN

FFOTESFFOCT

FFO.ILPUDCT

]05[TIBFD

PORD]06[FD/FDN

TESERPTCELESGCT

–––2/1[]KCOLC/BU/CT––

–

TC/UB/CLOCK [1/2] Menu screen

REC button

COUNTER switch

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 90 91

No comments

Jvc BR-HD50 User Manual Page 64