Jvc BR-HD50 User Manual download pdf (Page 35)

E-31

CONNECTION

Connecting the AC adapter

Connect the supplied AC adapter to BR-HD50.

Memo

z Even in the OPERATE OFF mode, a small

amount of electricity will still flow into the unit.

z When the unit is in the OPERATE OFF mode,

no operation can be performed except that of

the OPERATE buttons and cassette loading/

ejecting.

 Always attach the supplied ferrite core

to the DC cord. (XPage 29)

1. Remove one screw on the back panel of the

unit, and remove the DC cord clamp.

2. Connect the DC cord of the AC adapter to

the DC IN terminal of BR-HD50.

3. To prevent accidental disconnection of the

DC cord, insert the DC cord into the clamp,

orient the clamp as shown in the figure

above, and secure the clamp to the unit.

Use the screw removed in step

1 above to

secure the clamp to the unit.

4. Connect the supplied power cord to the AC

IN terminal of the AC adapter.

5. Connect the power cord to the power out-

let.

• BR-HD50 is turned on and the OPERATE

indicator lights up in red.

(OPERATE OFF mode)

• If DC IN MODE of the SYSTEM [2/2] Menu

screen is set to “OPE ON”, the OPERATE

indicator will light up in green.

(OPERATE ON mode)

Note

z Supply power to BR-HD50 using the supplied AC adapter. Do not

use other power sources.

z Do not unplug the DC cord and/or the power cord during recording

or playback.

z If the supply voltage is low, an alarm display of “LOW VOLTAGE”

is shown.

Screw

1. Clamp

Supplied AC adapter

Supplied power cord

DC cord

DC IN terminal

3. Clamp

Supplied ferrite core

OPERATE indicator

OPERATE

button

LOW VOLTAGE

Alarm message

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 90 91

Comments to this Manuals

No comments

Jvc BR-HD50 User Manual Page 35

Comments to this Manuals

Related products and manuals for Voice Recorders Jvc BR-HD50