Jvc RX-6010RBK EN User Manual download pdf (Page 35)

Specifications

Amplifier

Output Power

At Stereo operation:

Front channels: 100 W per channel, min. RMS, driven into 8 Ω

at 1 kHz with no more than 0.9% total harmonic

distortion. (IEC268-3/DIN)

At Surround operation:

Front channels: 100 W per channel, min. RMS, driven into 8 Ω

at 1 kHz with no more than 0.8% total harmonic

distortion.

Center channel:100 W, min. RMS, driven into 8 Ω at 1 kHz,

with no more than 0.8% total harmonic

distortion.

Rear channels: 100 W per channel, min. RMS, driven into 8 Ω

at 1 kHz, with no more than 0.8% total

harmonic distortion.

Audio

Audio Input Sensitivity/Impedance (1 kHz):

CD, TAPE/CDR, TV SOUND, VCR, DVD:

220 mV/47 kΩ

Audio Input (DIGITAL IN)* :

Coaxial: DIGITAL 1 (DVD): 0.5 V(p-p)/75 Ω

Optical: DIGITAL 2 (CD): –21 dBm to –15 dBm

(660 nm ±30 nm)

* Corresponding to Linear PCM, Dolby Digital, and DTS

Digital Surround (with sampling frequency — 32 kHz,

44.1 kHz, 48 kHz).

Audio Output Level:

TAPE/CDR, VCR: 220 mV

Signal-to-Noise Ratio (’66 IHF/DIN):

CD, TAPE/CDR, TV SOUND, VCR, DVD:

87 dB/67 dB

Frequency Response (8 Ω):

CD, TAPE/CDR, TV SOUND, VCR, DVD:

20 Hz to 20 kHz (±1 dB)

Tone Control:

Bass (100 Hz): ±10 dB

Treble (10 kHz): ±10 dB

Video

Video Input Sensitivity/Impedance:

Composite video: VCR, DVD: 1 V(p-p)/75 Ω

Video Output Level:

Composite video: VCR, MONITOR OUT:

1 V(p-p)/75 Ω

Synchronization: Negative

Signal-to-Noise Ratio: 45 dB

FM tuner (IHF)

Tuning Range: 87.50 MHz to 108.00 MHz

Usable Sensitivity: Monaural: 17.0 dBf (1.95 µV/75 Ω)

50 dB Quieting Sensitivity:

Monaural: 21.3 dBf (3.2 µV/75 Ω)

Stereo: 41.3 dBf (31.5 µV/75 Ω)

Signal-to-Noise Ratio (IHF-A weighted):

Monaural: 78 dB at 85 dBf

Stereo: 73 dB at 85 dBf

Total Harmonic Distortion:

Monaural: 0.4% at 1 kHz

Stereo: 0.6% at 1 kHz

Stereo Separation at REC OUT: 35 dB at 1 kHz

Alternate Channel Selectivity: 60 dB: (±400 kHz)

Frequency Response: 30 Hz to 15 kHz: (+0.5 dB, –3 dB)

AM (MW/LW) tuner

Tuning Range: MW: 522 kHz to 1 629 kHz

LW: 144 kHz to 288 kHz

Usable Sensitivity: Loop antenna: 400 µV/m (MW)

Signal-to-Noise Ratio: 50 dB (100 mV/m)

General

Power Requirements: AC 230V , 50 Hz

Power Consumption: 200 W (at operation)

2 W (in standby mode)

Dimensions (W x H x D): 435 mm x 146.5 mm x 416 mm

(17

/16 in. x 5

/16 in. x 16

/16 in.)

Mass: 8.6 kg (19.0 lbs)

Designs & specifications are subject to change without notice.

EN28-32.RX-6010&6012R[B]_f 01.1.9, 5:58 PM32

1 2 ... 30 31 32 33 34 35 36

Comments to this Manuals

No comments

Jvc RX-6010RBK EN User Manual Page 35

Comments to this Manuals

Related products and manuals for Receivers and Amplifiers Jvc RX-6010RBK EN