Jvc Model DLA-HX1E User Manual download pdf (Page 9)

Controls and Features

Connector Panel

1 [PC2] Input terminal (BNC x 5)

This is an input terminal for component signals (Y, CB, CR)

or DTV-format (Y, P

B, PR) signals. Devices which have com-

ponent signal output terminals can be connected. This ter-

minal can also be used as multipurpose video input termi-

nals that allow input of the following signals: analog RGB

signals, vertical sync (V) signals, and horizontal sync (H)

signals/ composite signals (Cs). Devices which have ana-

log RGB signals output terminals can be connected.

(☞ page 21, 22)

To use this terminal, the “PC2(BNC)” item in the “Options”

menu must be set correctly according to the input signals.

(☞ page 39)

• Input of external sync signals is automatically detected.

Detection of H/V signals or Cs signals causes automatic

switching to external sync. The priority order is H/V>Cs.

• When computer signals are input, the uppermost edge

of the image may appear to bow if the sync signal input is

a composite sync (Cs) or G on sync signal. In this case,

please use separate sync signals for vertical sync (V)

and horizontal sync (H).

2 [PC1] Input terminal (D-sub 3 rows 15 pin)

This is an input terminal dedicated to computer signals (RGB

Video signals and sync signals).

Connect the display output terminal of the computer to this

terminal. When a Macintosh computer is to be connected,

please use the conversion adapter (sold separately) for Mac.

(☞ page 22)

• When computer signals are input, the uppermost edge

of the image may appear to bow if the sync signal input is

a composite sync (Cs) or G on sync signal. In this case,

please use separate sync signals for vertical sync(V) and

horizontal sync(H).

3 [PC3] Input terminal (DVI-D 24 Pin Dual/ Single)

HDCP compatible video signals (480p, 720p 60/59 Hz, 1080i

60/59 Hz) and input terminal for personal computer (PC)

signal. Connect the display output terminal of the computer

to this terminal. (☞ page 22)

• The menu screen for HDCP compatible signal input is

the same as when PC input is selected.

4 [SCREEN TRIGGER] Terminal

The signal output for controlling roll-up screen that sup-

ports [SCREEN TRIGGER]. Outputs DC 12 V / max. 100 mA

when power is on.

(Tip = DC +12 V, Sleeve = Gnd)

Before using the supplied cable, read ‘How to use the

[SCREEN TRIGGER] terminal cable’ on page 5.

5 [AUDIO IN] (audio) Terminal (mini jack)

This is the audio input terminal for devices connected to

[PC1], [PC2], [PC3], [VIDEO] or [Y/C]. Connect the audio

output terminal of the device to this terminal.

(☞ page 21, 22)

• When [PC1], [PC2], [PC3], [VIDEO] or [Y/C] input is be-

ing selected, the inputted audio signals will be reproduced

by the projector speaker.

(Audio output for this projector is monaural.)

6 [REMOTE] Terminal (stereo mini jack)

When the remote control is unable to work due to rear pro-

jection etc., the [REMOTE] terminal can be used to connect

an external sensor to the projector. The external sensor is

not generally sold. Please check with your authorized dealer.

7 [CONTROL RS232C IN/OUT] Terminal (D-sub 9

Pin)

This is the RS-232C interface-specific terminal. The pro-

jector can be controlled by a computer connected exter-

nally. More than one projector can be controlled using both

the [RS-232C IN] and [RS-232C OUT] terminals.

(☞ page 23)

•For details, please check with your dealer.

8 [Y/C] Input Terminal (Mini DIN 4 Pin)

This is the input terminal for Y/C (S-Video) signals. Con-

nect this terminal to the S-video output terminal of a video

deck, etc. (☞ page 21)

9 [VIDEO] Input Terminal (RCA pin jack)

This is an input terminal for composite video signals. Con-

nect this terminal to the composite video output terminal of

a VCR, etc. (☞ page 21)

VDVIH/C

PC1

PC3

PC2

AUDIO IN

REMOTE

SCREEN

TRIGGER

RS-232C OUT RS-232C IN Y/C VIDEO

CONTROL VIDEO IN

2 [PC1] Input Terminal

8 [Y/C] Input

Ter minal

3 [PC3] Input Terminal

1 [PC2] Input Terminal

9 [VIDEO] Input

Ter minal

7 [CONTROL RS232C

IN/OUT] Terminal

5 [AUDIO IN]

Ter minal

6 [REMOTE]

Te r minal

4 [SCREEN

TRIGGER]

Te r minal

HX-1E_p05-14_En.p65 10/3/03, 6:07 PM9

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 61 62

Comments to this Manuals

No comments

Jvc Model DLA-HX1E User Manual Page 9

Comments to this Manuals

Related products and manuals for Projectors Jvc Model DLA-HX1E