JVC TS-C421SPG User Manual download pdf (Page 5)

ENGLISH

Bundling the speaker cords

You can bundle the speaker cords neatly with the supplied cord clamp, as illustrated.

• Stick the cord clamp after removing its protective seal. Give an amount of time before

bundling the speaker cords, or the cord clamp may be detached.

• If you are sticking the cord clamp to the back of the display, be careful not to block the

ventilation hole.

1. Fold the end of each speaker

cord.

Attach to the speakers

2. Press and hold the terminal

clamp.

3. Insert the speaker cord, and

release the finger from the

terminal clamp.

• Connect the cord with black stripes to the · (black) terminal and the other cord to the ª (red) terminal.

• Be careful that connection of the speaker cords to incorrect polarity terminals (ª and ·) degrades stereo

feeling and sound qualities.

When you connect the supplied speaker cord to the terminal clamp of the speakers, fold the end of each speaker

cord to avoid short-circuit.

Attach to the display

• Connect the cord with black stripes to the · (black) terminal and the other cord to the ª (red) terminal.

• Be careful that connection of the speaker cords to incorrect polarity terminals (ª and ·) degrades stereo

feeling and sound qualities.

1. Open the terminal clamp. 2. Insert the speaker cord. 3. Close the terminal clamp.

Connecting the speaker cord

Speaker cord

Cord clamp

EN_TS-C421SPGU_1.p65 03.3.20, 11:03 AM3

1 2 3 4 5 6 7 8 9 10 ... 39 40

No comments

JVC TS-C421SPG User Manual Page 5