JVC DynaPix LT-26DX7SSP User Manual download pdf (Page 29)

ENGLISH

IMPORTANT! PREPARE USE

SETTINGS

TROUBLE?

Troubleshooting (continued)

Problem Actions

page

Problem Actions

page

Error messageFunctionsHDMI

 Use the cable marked with HDMI logo.

No picture, no sound –

 The recorder is recording another programme, or is playing.

“ No Recording Device

Busy”

–

 The recorder is not ready for recording.

Check the videotape or DVD disc.

“ No Recording Media

Problem”

–

 The displayed video cannot be recorded.

“ No Recording

Possible”

–

 A problem occurs at the recorder.

“No Recording” –

 Digital channels, EXT-4, EXT-5, EXT-6 inputs, and PC mode

cannot be selected in the sub-picture.

 RGB input signal of EXT-1 and EXT-2 are not available in

dual-picture mode.

Some inputs cannot

be selected in the

sub-picture

–

 Press 2 to start ACI again.

If you still receive the “ACI Error” after numerous tries,

press 3 to cancel ACI.

“ACI Error” –

 Switch “Size” in “HDMI Setting” to “1” or “2”.

Wrong screen size 36

 Check if the device is compliant with HDMI.

 Switch “Audio” in “HDMI Setting” to “Digital” or “Auto” for

HDMI devices, or “Analogue” or “Auto” for DVI devices.

(Not available for “EXT-6”.)

No sound

–

 Wait a little for the signal to stabilize when switching the

signal format for an “HDMI” device.

Green and distorted

screen

–

 Is the T-V LINK compatible device connected to EXT-2?

 Is the SCART CABLE “Fully Wired”?

 Is the T-V LINK compatible device turned on?

After conﬁrming all the conditions above,

press “OK” button again.

“Feature Not Available”

–

DTV

When “Dolby Digital” is selected in “Digital Audio Output”, the

sound of a programme containing “Dolby Digital” signals cannot

be output from the TV or the audio system connected to the

“AUDIO OUT” terminal.

When the channel is changed, a message will be displayed for

a few seconds.

 To listen with the TV or audio system

 Select a language without “(Dolby)” from “Audio Selection”

 Switch “Digital Audio Output” to “PCM”

“Dolby Digital selected!

No analogue audio

available”

 LCD panels use ﬁne dots (“pixels”) to display images.

While more than 99.99% of these pixels function properly,

a very small number of pixels may not light, or may light all

the time.

Please understand that this is not a malfunction.

Black or white dots

appear on the screen

–

 Upgrade the tuner software by using the “Receiver Upgrade”

function.

When JVC or the

broadcasting station

informs you of the

software

 Once the PIN code is input, all the lock functions (“Lock” and

“Maturity Rating”) are released. If you want to use the lock

function again, turn the TV off and then turn it on again.

Locked channels can

be watched without

inputting PIN code

–

 The default PIN code is “0000”. If you forget the numbers that

you used to change the default PIN code, ﬁrst input “0081” in

the “Enter PIN code” and then register a new PIN code.

Forgot my PIN code! 41

Screen

 Some digital channels cannot be watched on this TV.

No picture, no sound 57

53-54 6/29/2006 1:16:43 PM

1 2 ... 24 25 26 27 28 29 30 31

Comments to this Manuals

No comments

JVC DynaPix LT-26DX7SSP User Manual Page 29

Comments to this Manuals

Related products and manuals for LCD TVs JVC DynaPix LT-26DX7SSP