JVC TH-A10R User Manual download pdf (Page 51)

Setting speaker level

1. Open the SPEAKER MENU.

See page 45, “Opening the SPEAKER MENU”.

2. Switch the speaker mode to EXPERT.

3. Move the pointer to the speaker selection box

using the 5/∞ cursors.

Use the 2/3 cursors to select SPEAKER LEVEL.

Pressing the 2/3 cursors switches between the following

settings.

jSPEAKER SIZEjSPEAKER LEVELjDELAYj

4. Play a test tone (only when the DSP mode is set to

“SURROUND ON” or “THEATER”).

Using the 5/∞ cursors, move the pointer to TEST TONE and

press ENTER.

Note:

• The speaker level can be set without playing a test tone.

• Speakers with speaker size set to OFF will not play a test

tone.

5. Adjust speaker level.

Use the 5/∞ cursors to move the pointer to the parameter you

wish to set. Then adjust the level using the 2/3 cursors.

The Note icon on the screen indicates the selected speaker.

C.SP : Adjust center speaker level.

R.L. SP : Adjust left rear speaker level.

R.R. SP : Adjust right rear speaker level.

SUB WOOFER : Adjust sub-woofer level.

• Each speaker level can be adjusted from –10 dB to +10 dB.

• Speakers marked with a “ – – “cannot be adjusted.

• The F. SP (Front Speaker) level cannot be adjusted.

• You can save center speaker and rear speaker adjustments

for each DSP mode and save them in memory.

After adjusting speaker levels

6. Stop test tone playback.

Use the 5/∞ cursors to move the pointer to TEST TONE and

press ENTER.

Adjusting delay time

The delay time for the center speaker and rear speakers is calculated

by comparing the distance between the rear/center speakers and the

listening point with the distance between the front speakers and the

listening point.

1. Open the SPEAKER MENU.

See page 45, “Opening the SPEAKER MENU”.

2. Switch the speaker mode to EXPERT.

3. Move the pointer to the speaker selection box

using the 5/∞ cursors.

Use the 2/3 cursors to select DELAY.

Pressing the 2/3 cursors switches between the following

settings.

jSPEAKER SIZEjSPEAKER LEVELjDELAYj

4. Adjusting delay time.

Use the 5/∞ cursors to move the pointer to the parameter you

wish to set. Then adjust the delay time using the 2/3 cursors.

The Note icon on the screen indicates the selected speaker.

C. SP : Adjusts the center speaker delay time. Delay time can

be set between 0 ms and 5 ms.

When the distance between the listening point and the

center speaker is close to the distance to the front

speakers, set the delay time to 0 ms. Increase the delay

time when the distance to the center speaker is shorter.

• A 1ms increase/decrease of delay time is equivalent

to a 30 cm change in distance.

R. SP : Adjusts the rear speaker delay time.

Delay time can be set between 0 ms and 15 ms.

When the distance between the listening point and the

rear speakers is close to the distance to the front

speakers, set the delay time to 0ms. Increase the delay

time when the distance to the rear speakers is shorter.

• A 1ms increase/decrease of delay time is equivalent

to a 30 cm change in distance.

• Speakers marked with a “ – – “ cannot be adjusted.

• “CROSS OVER” has the same effect as setting with

“SPEAKER SIZE”.

Adjustable

parameters

– –

SPEAKER MENU Settings

Adjustable

parameters

Note icon

TH-A10R[B]6/f 00.6.29, 6:50 PM47

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 67 68

Comments to this Manuals

No comments

JVC TH-A10R User Manual Page 51

Comments to this Manuals

Related products and manuals for DVD players JVC TH-A10R