JVC TH-A10R User Manual download pdf (Page 50)

SPEAKER MENU Settings

Playing a test tone

When you wish to play a test tone, make sure the sound mode is set

to “SURROUND ON” or “THEATER.” The test tone will not play

in other modes.

1. Open the SPEAKER MENU.

See page 45, “Opening the SPEAKER MENU”.

2. Switch the speaker mode to EXPERT.

3. Move the pointer to TEST TONE using the 5/∞

cursors.

4. Press ENTER.

Test tones will be played in the following order:

Left Front Speaker = Center Speaker = Right Front Speaker

±≠

Left Rear Speaker+Right Rear Speaker

• The note icon on the screen moves to the active speaker.

On the center unit, the audio channel display lamp also

moves to the active speaker, and the name of the active

speaker appears in the display window, reflecting the

configuration of the audio channel display lamps.

• The test tone is 6.

To stop the test tone, move the pointer to TEST TONE and press

ENTER.

Note:

• The test tone stops when the pointer moves from TEST TONE

while the speaker selection box displays “SPEAKER SIZE” or

“DELAY”.

Settings may be

entered while the tone

is sounded only if the

speaker selection box

displays “SPEAKER

LEVEL”.

Setting speaker size

1. Open the SPEAKER MENU.

See page 45, “Opening the SPEAKER MENU”.

2. Switch the speaker mode to EXPERT.

3. Move the pointer to the speaker selection box

using the 5/∞ cursors.

4. Use the 2/3 cursors to select SPEAKER SIZE.

Pressing the 2/3 cursors toggles between the following

settings.

jSPEAKER SIZEjSPEAKER LEVELjDELAYj

5. Set speaker size.

Use the 5/∞ cursors to move to the parameter you wish to set,

then adjust the parameter with the 2/3 cursors.

The Note icon on the screen indicates the selected speaker.

Speaker parameters —————————————

Speaker size

Select LARGE when the cone speaker imbedded in the speaker

being used has a diameter of 12 cm or more.

Select SMALL when the diameter is less than 12 cm.

When using this system’s front, center, or rear speakers select

SMALL for each.

Selecting LARGE may result in speaker damage.

F. SP : Sets left and right front speaker size.

Pressing the 2/3 cursors toggles between the following

settings.

SMALL jLARGE

C. SP : Sets center speaker size.

Pressing the 2/3 cursors toggles between the following

settings.

When the F.SP is selected “SMALL”:

SMALL j OFF

When the F.SP is selected “LARGE”:

j SMALL j LARGE j OFF j

• Select OFF when the center speaker is not connected, or

is not in use.

R. SP : Sets rear speaker size.

Pressing the 2/3 cursors toggles between the following

settings.

When the F.SP is selected “SMALL”:

SMALL j OFF

When the F.SP is selected “LARGE”:

j SMALL j LARGE j OFF j

• Select OFF when the rear speaker is not connected, or is

not in use.

CROSS OVER : When using a small speaker with weak bass as a

front, center, or rear speaker, you can redirect bass

audio to the sub-woofer. Select a cross over

frequency to match the size of the small speaker

being used.

Pressing the 2/3 cursors toggles between the

following settings.

200Hz j 100Hz j 120Hz

Cross over frequency Speaker diameter

100Hz approx. 10 cm (4”)

120Hz approx. 8 cm (3-3/16”)

200Hz approx. 4 cm (1-5/8”)

BASS : BASS is fixed for SUBWOOFER. This cannot be selected

with the pointer.

Speaker

selection box

Selected

parameter

Note icon

Speaker

selection

box

Note icon

TH-A10R[B]6/f 00.7.4, 8:01 PM46

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 67 68

Comments to this Manuals

No comments

JVC TH-A10R User Manual Page 50

Comments to this Manuals

Related products and manuals for DVD players JVC TH-A10R