JVC MX-J100 User Manual Page 21

  • Download
  • Add to my manuals
  • Print
  • Page
    / 28
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 20
– 16 –
English
Using the Microphone
You can enjoy singing along and microphone mixing.
The MIC LEVEL control adjustment is valid for
microphone connected to the MIC jack.
IMPORTANT:
Always set MIC LEVEL to MIN when connecting or
disconnecting the microphone.
When you do not use the microphone, keep the
microphone unconnected.
Singing Along
Vocal Masking
Vocal Masking reduces the lead vocal of the playing source,
and allows you to replace it by singing into the microphone
as the music plays.
1
Rotate MIC LEVEL to MIN.
2
Connect the microphone (not
supplied) by plugging it into the MIC jack.
3
Start playing the source — CD, tape, or other
connected component.
4
Press V. MASKING on the remote
control.
“V.MASK” appears on the display.
5
Rotate MIC LEVEL and VOLUME
controls as you sing into the
microphone.
By pressing REC/PAUSE, you
can record your singing along if
you want. (For more details, see
page 15.)
To apply an echo to your voice
Press ECHO on the front panel so that the
echo indicator lights up on the display.
Each time you press the button, the echo
level changes as follows:
If howling or squealing (feedback) occurs while using
the microphone
Take the following actions to prevent these noises.
Adjust the MIC LEVEL and VOLUME controls
Avoid pointing the microphone towards the speakers.
If you use the following sources as the playing source
for Vocal Masking, you cannot get the satisfactory
results
Radio programs — a radio signal is not as reliable as the signals
coming from a tape or CD.
Monaural sources.
Poorly dubbed tapes.
Sources recorded with duets, strong echo, a chorus, or only a few
instruments.
Microphone mixing
When you sing along with multiplex tapes or CDs, follow the
procedure below:
On the unit ONLY:
1
Rotate MIC LEVEL to MIN.
2
Connect the microphone (not
supplied) by plugging it into the MIC jack.
3
Start playing the source — CD, tape or other
connected component.
4
Rotate MIC LEVEL and
VOLUME as you sing into the
microphone.
By pressing REC/PAUSE, you
can record your singing along
if you want. (For more details,
see page 15.)
To use microphone only
Without any background sound, you
can use your microphone, and record it if you want.
1 Rotate MIC LEVEL to MIN.
2 Connect the microphone (not supplied) by plugging it
into the MIC jack.
3 Press CD 3/8, then 7.
No background sound will be heard.
4 Rotate MIC LEVEL and VOLUME as you sing or
speak into the microphone.
By pressing REC/PAUSE, you can record your singing
along if you want. (For more details, see page 15.)
MIC LEVEL
MIN MAX
MIC LEVEL
MIN MAX
MIC LEVEL
MIN MAX
MIC LEVEL
MIN MAX
VOLUME
+
VOLUME
+
V.MASKING
As the number increases, a stronger echo
effect applies to your voice.
ECHO 1
( )
ECHO 2
( )
ECHO OFF
(Canceled)
( )
ECHO
EN15-22.MX-J100[U,US]/f 00.5.9, 0:04 PM16
Page view 20
1 2 ... 16 17 18 19 20 21 22 23 24 25 26 27 28

Comments to this Manuals

No comments