Jvc XV-THS3 User Manual download pdf (Page 39)

Tuner operations

When the stereo FM program currently tuned in is noisy, you can

change the FM reception mode to improve the reception.

7 While listening to an FM station

Press FM MODE.

The FM reception mode appears on the display window.

Each time you press the button, the FM reception mode changes.

• AUTO MUTING:

When a program is broadcast in stereo, you will hear stereo

sound. (The ST indicator lights on the display window.) When in

monaural, you will hear monaural sound. This mode is also

useful to suppress static noise between stations. The AUTO

MUTING indicator lights on the display window.

• MONO:

Reception will be improved although you will lose the stereo

effect. (The ST indicator goes off.) In this mode, you will hear

noise until you are tuned in to a station. (The AUTO MUTING

indicator also goes off.)

RDS allows FM stations to send an additional signal along with

their regular program signals. For example, the stations send their

station names, as well as information about what type of program

they broadcast, such as sports or music, etc.

When tuned in to an FM station which provides the RDS service,

the RDS indicator lights up on the display window.

With the system, you can receive the following types of RDS

signals:

PS (Program Service): Shows commonly known station names.

PTY (Program Type): Shows types of broadcast programs.

RT (Radio Text): Shows text messages the station sends.

Enhanced Other Network: See page 38.

NOTE

• RDS is not available for AM (MW) broadcasts.

• RDS may not operate correctly if the station tuned is not transmitting

RDS signal properly or if the signal strength is weak.

IMPORTANT

Before using the remote control for the

following operation;

1 Set the remote control mode selector to

AUDIO.

2 Press FM/AM.

7 To show the RDS signals information

Press RDS DISPLAY while listening to an

FM station.

Each time you press the button, the indication on the display

window changes.

PS (Program Service):

While searching, “PS” appears and then the station names will be

displayed. “NO PS” appears if no signal is sent.

PTY (Program Type):

While searching, “PTY” appears and then the type of the broadcast

program will be displayed. “NO PTY” appears if no signal is sent.

RT (Radio Text):

While searching, “RT” appears and then text messages the station

sends will be displayed. “NO RT” appears if no signal is sent.

Frequency:

Station frequency (non-RDS service).

About characters shown on the display window

When PS, PTY, or RT signals appear on the display window, some

special characters and marks may not be displayed correctly.

NOTE

• If searching finishes at once, “PS”, “PTY”, and “RT” will not appear

on the display window.

Selecting the FM

reception mode

Using the RDS (Radio

Data System) when

receiving FM stations

103.50M

RDS indicator

AUDIO

See page 35 for button locations.

THS3-EN.book Page 36 Tuesday, February 24, 2004 8:35 PM

1 2 ... 34 35 36 37 38 39 40 41 42 43 44

Comments to this Manuals

No comments

Jvc XV-THS3 User Manual Page 39

Comments to this Manuals

Related products and manuals for Acoustics Jvc XV-THS3